15帶線束嘅16A 250v溫度保險絲切斷連結

Temp fuse Cutoff Link都稱為熱熔斷器 (GB9816.1-2013《冰箱貼》), 係一種溫度傳感電路切斷裝置. The Temp fuse Cutoff Link can sense the overheating generated by the abnormal operation of electrical and electronic products, 從而切斷電路以避免火災. 常用於: 風筒, 電熨斗, 電飯煲, 電爐, 變形金剛, 電機, 飲水機, 咖啡壺, 等. The Temp fuse Cutoff Link cannot be used again after operation, and only operates once at the fuse temperature.
It consists of a movable contact (滑動觸點), 彈簧 (spring), and a fusible (electrically nonconductive thermalpellet). Before the temperature fuse is activated, 電流由左側引綫流向可移動觸點 (滑動觸點), 並流向右引線，穿過金屬外殼. 当外部溫度達到預定溫度時, the organic fusible melts and the compression spring becomes loose. 噉係, 彈簧膨脹, and the movable contact (slidingcontact) is separated from the left lead. 電路打開, and the current between the movable contact (滑動觸點) and the left lead is cut off.

15一個16A 250v溫度保險絲切斷連結

Temp Cutoff fuse crimping terminal wire assembly

帶電纜組件嘅臨時熔斷器切斷鏈路供應商

Thermal fuses have different functions depending on the product they are packaged in. Fuses made of special materials can protect circuits from overheating, 噉係, 熱熔斷器, also known as thermal fuses. Thermal fuses cut off circuit devices through temperature sensing, and can sense whether the electronic products of electrical equipment are overheating during abnormal operation, and cut off the circuit to avoid fire. What if you don’t know much about thermal fuses? 下一個, let’s see how to install and use them.
The steps of the thermal fuse installation method are explained as follows:
(1) When using lead bending, please bend from the part more than 6 mm away from the root. When bending, do not damage the root or lead. Do not forcefully stretch, press or twist the lead.

(2) When the thermal fuse is fixed by screws, rivets or terminals, prevent poor contact caused by mechanical creep.

(3) The connector should be able to work reliably within the working range of the electrical product and will not be displaced due to vibration and impact.

(4) When welding the lead, limit the heating humidity to a minimum. Be careful not to add high temperature to the thermal fuse, forcibly stretch, press, or twist the thermal fuse and lead. Please cool for more than 30 seconds immediately after welding.

(5) Thermal fuses can only be used within the specified rated voltage, current, and specified temperature. Pay special attention to the maximum continuous temperature that the thermal fuse can withstand.

產品描述

SEFUSE Thermal Cutoff fuse SEFUSE 250V 15A Thermal Cut Out Link

產品描述

項目	熱熔斷器, 熱熔斷, 熱連結
身體Tyle	金屬
鉛直徑	1.3毫米
引線長度	20+35mm/35+35mm/ 定制
額定電壓	250V交流
額定電流	15一個
安裝類型	軸向引線
體直徑	4.2毫米
本體長度	11毫米
認證	UL CSA VDE BEAB CCC

產品特點

額定電流: 15一個, 額定電壓: 250V, Rated Functioning Temperature: 73~240度

優勢: 一次過操作, 穩定精確, 緊湊嘅, 氣密密封結構，耐用可靠, 對環境溫度極好敏感.

功能: 熱熔斷器, 廣泛用于電流電器中作為熱保護. 当溫度超過規定嘅TF水平時, 電觸點將打開.

應用: 適用於家用電器, 電氣工業設備, 辦公自動化設備, 普通紙影印機, 變形金剛, 電機, 等.

規範

(SEFUSE SF-E熱熔斷器, 熱熔斷, 熱連結)

部分數	Tf(攝氏度)	Operating Temperature(攝氏度)	Th	Tm	額定當前	額定電壓
SF70Y	73	70±2	45	150	15一個	交流250V
SF76Y	77	76±º	51	150
SF91Y	94	90±³₁	66	150
SF96Y	99	96±2	71	150
SF109Y	113	109±³₁	84	150
SF119Y	121	119±2	94	150
SF129Y	133	129±2	104	159
SF139Y	142	139±2	114	159
SF152Y	157	152±2	127	172
SF169Y	172	169±¹₃	144	189
SF188Y	192	188±¹₃	164	300
SF214Y	216	214±¹₃	200	350
SF226Y	227	226±¹₃	200	300
SF240Y	240	237±2	200	350

開啟溫度公差: TF+0°C/-5°C
溫度額定值 (Tf):额定開啟溫度
保溫溫度 (Th):在熱熔斷器的外殼末端測得的最高溫度，在此溫度下，熱熔斷器可以保持一段時間 168 未開封時間.
最高溫度 (Tm):熱熔斷可以保持10分鐘作為開路，然後可以保持喺兩倍額定電壓一段時間嘅最高溫度 2 幾分鐘，在此期間其機械和電氣性能唔會受到影響