Bimetal KST Heating Thermostat for Electric Heater Temperature Control Switch

Bi-Meta Thermostat KST Temperature Control Switch with setting temperature 60°C~250°C load capacity 16A/250VAC. Bi-Metal Line Voltage Thermostat is designed to regulate precise temperature in commercial, industrial, and agricultural settings. Widely used in Elextric Heater, Electric Iron, 油炸, Rice Cooker, Toaster, Fat fryer, Warm electric light, Oven and so on.

Temperature Switch Bimetallic Heating Thermostat for Toaster, Fat fryer, Warm electric light

Adjustable KST Bimetal Thermostat Switch For Electric Iron, Rice Cooker

Adjustable KST Bimetal Thermostat Switch For Electric Iron, Rice Cooker

Description Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Rice Cooker
KST series adjustable thermostat is designed for High- power loading appliance with maximum current of 16A. Thermostat is operating by sensing ambient heat and the heat transmit through the metal mounting plate. It has various mounting design customized for different appliance upon requirements. Widely used in fan heater, oven, and convection heater.

Features Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
* Stable performance
* Adjustable temperature
* High temperature control accuracy
* High reliability
* Long life
* Less interference with radio.

Dimensions Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer (毫米)

Applications Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
KST series temperature switch, KST – 一個, KST – B – C, KST – D and KST – R.
KST series temperature switch is mainly applied to grill, electric iron, fan heater, oil heater, simmer pot,
frying pan and protection circuits.

Standard Ratings Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer

Custom size Of The Adjustable Bimetal Thermostat KST 10A /16A 250V

PRODUCT ADVANTAGES Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
● The structure and size of the mounting plate can be changed according to the actual situation of the customer;
● The terminal can be screwed or fast-connected according to customer’s requirements. The position of the terminal can also be changed according to the actual situation.
● The dimensions in parentheses are variable according to the actual situation. The drawings are for reference only.

INSTALLATION AND DIRECTION FOR USE Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
1. 接地方式: Connected to the grounding metal parts of the equipment through the metal casing of the thermostat.
2. The thermostat shall be operated in a general indoor environment where the relative humidity of the air is not more than 90%, no corrosive gas, no flammable gas and conductive dust.
3. When the temperature controller is in contact with the temperature, the cover should be placed close to the heat-generating part of the controlled appliance, and the thermal surface of the cover should be coated with thermal grease or other similar heat-conducting medium.
4. When the temperature controller is exposed to liquid or steam, it is recommended to use a stainless steel cover and a reliable leak-proof measure to prevent liquid from seeping into the insulation of the thermostat.
5. It is not possible to collapse or deform the top of the cover to avoid changes in operating temperature or other properties.
6. Do not allow liquid to penetrate inside the thermostat! The housing must be protected from excessive forces to prevent cracking; the housing should be kept clean to prevent contamination of conductive materials to prevent short-circuit breakdown due to reduced insulation.
7. The terminal cannot be bent during use, otherwise the reliability of the electrical connection will be affected.