產品分類
產品標籤
中國定製帶螺栓嘅自動復位斷路器
乜嘢係自動復位斷路器? 斷路器嘅功能同應用:
自動復位斷路器以雙金屬片嘅動作特性為產品嘅工作原理. 用于AC/DC額定電流5-50A; 輸入電壓: 標準12VDC; 125VAC/250VAC50-60HZ; 可定製嘅24VDC需要防止過載或過電流嘅電路.
乜嘢係自動復位斷路器? 斷路器嘅功能同應用:
自動復位斷路器以雙金屬片嘅動作特性為產品嘅工作原理. It is used in AC/DC circuits that need to be protected from overload or excessive current. When a short circuit to ground, or too much current flows through the circuit breaker, the contacts inside auto heat up and separate, interrupting the flow of electricity and protecting your circuit. E5 ATV Auto reset circuit breakers are commonly used to protect electrical wiring and components in 12 volt vehicles from short circuits and excessive current draw. They have been reliably used for decades as a replacement to costlier fuses and fusible link wires.
Connections to the E5 circuit breaker is made using the two #8 – 32 studs protruding from the face. One connection stud is for your power connection, and is labeled ‘BAT’. The other stud connection is labeled ‘AUX’, which is where you attach the electrical device you want to protect. The base of the short stop breaker comes in two mounting feet configurations, and also is available without mounting feet. E5 Auto reset circuit breakers operate in the following way – When a short circuit to ground, or too much current flows through the breaker, the contacts inside heat up and separate, interrupting the flow of electricity and protecting your circuit. When the short stop breaker cools, the electrical contacts inside will re-connect, thereby automatically resetting the circuit breaker. If the short circuit or over current condition still exists, the breaker will trip again and repeat the cycle. One of the most common circuit breakers found in automobiles, 貨車, boats, 設備, and RV’s.
產品性能:
● Rated current 5-50A;
●輸入電壓: 標準12VDC; 125VAC/250VAC50-60HZ; customizable 24VDC
●耐壓: 1500VAC/1分钟, 漏電流≤0.5mA;
●絕緣電阻: 500VDC1Min≥100MΩ;
●額定短路能力: 2500A@12VDC;
●重置模式: E511, E512, E513; E516, E517, E518 automatically reset T1;
●其他產品嘅重置模式: E521, E5122, E523 unplug the power to reset T2; E536, E537, E538 manually reset T3;
● The shell is a metal shell, colored zinc E511, E512, E513, indicating that T1 automatically resets;
● The other is blue zinc, E521, E5122, E523, indicating that T2 unplugs the power to reset.
The plastic shell is ultrasonically welded, with good airtightness and waterproof. The mounting aperture of the plastic shell can be freely selected according to needs: 5.1毫米, 5.8毫米, 6.7毫米, 等.
There are three types of installation positions: no wings, horizontal wings, longitudinal wings, and single wings. Strong bolt selection: divided into #10-32 thread bolts (9.4毫米, 14.2毫米, 16.8毫米), 250 plug terminals. The company can also customize according to customer needs.
● The E5 series has many sizes and specifications. Customers can further ask the business personnel for the “E5 product catalog”;
Action characteristics:
●測試環境溫度: 25±3°C, 額定電流 100%, 一小時內無絆倒; 額定電流 135%, 範圍內跳掣 30 紀要; 額定電流 200%, 範圍內跳掣 60 秒;
Safety certification
● Meets SAE standard requirements.
● Meets EU RoHS environmental protection directive requirements.
● Meets EU REACH environmental protection directive requirements
聯繫我哋
等待您的電子郵件, 我哋會在內回覆您 12 數小時,提供您需要嘅寶貴信息.