中國TO-220圓盘溫控器熱敏掣供應商

中國定製TO-220熱熔斷掣JUC-31F/ KSD-01F instead 6700 系列超小型溫控器. JUC-31F/ KSD-01F符合RoHS標準, 正向捕捉操作, 單極 / 單擲, 超小型雙金屬恆溫器，可在單個設備中提供準確可靠的傳感和開關. The JUC-31F/ KSD-01F, 6700 series thermostat dimensionally conforms to the international product package standard Y220 / TO220.

6700 30-150過載250V 2A迷你熱敏掣

KSD-01F 250V 2A Mini Bimetallic Thermostat Thermal Switch

KSD-01F熱熔斷掣 , 觸摸式熱熔斷掣

Thus, theJUC-31F / KSD-01F, 6700 may be automatically placed and soldered onto PC boards with high speed automated equipment, eliminating the need for the expensive hand placement and termination required today for most power supply thermostats.

JUC-31F / KSD-01F, 6700 特徵
RoHS compliant per EU directive 2002 / 95 / EC, UL認證, TUV公司;
TO-220 / Y-220 international electronic package standard;
Ideal for surface and air sensing on PC boards and heat sinks;
VDE approved with “P” bracket option;
Gold-plated contacts;
Up to 20,000 life cycles @ max standard amperage;
Up to 100,000 life cycles @ max gold contact amperage;

Contact Resistance-接觸電阻 : 50 最大毫歐姆 (before and after rated life)
Contact Ratings : Cycles Voltage Amps (resistive); 20,000 48 VDC直流電 0.5; 100,000 5 VDC直流電 0.001 (gold).
Contact Operations : Either close on rise (make) or open on rise (破)
工作溫度 : 40°C to 130°C (104°F to 266°F)
Temperature Tolerance : Standard of ±5°C (±9°F) with nominal operating temperature settings in 5°C increments
Short Term / Long Term Exposure Limit Short = 260°C (500°F), 10 second duration; Long = -55°C to 160°C (-67°F to 320°F)
介電強度 : Nickel-plated copper bracket has 1480 VAC 60Hz, 1 second duration terminals to case. Plastic bracket has 2000 VAC 60Hz, 1 second duration terminals to case.
絕緣電阻 : 100 Mohms at 500 VDC直流電
Contact Bounce : 3 milliseconds max (make)
Vibration : Per Mil-Std-202, method 204D, test condition D, 10 自 2,000 Hz
Shock : Per Mil-Std-202, method 213, test condition C, 100 G’s for 6 millisecond duration, 1⁄2 sine wave
Seal : High temperature epoxy sealed for wave soldering and cleaning, moisture proof per Sensata specification S-722 (unit will not leak while submerged in 9” of water for a minimum of two minutes)
Base Material : PPS (Polyphenylene Sulfide), 94 VO rated
端子材料 : 65% Copper, 18% Nickel
觸點材料 : Gold-plated or overlay, silver crossbar
Mounting Bracket Material : Nickel-plated copper bracket has 1480 VAC 60Hz, 1 second duration terminals to case. Plastic bracket has 2000 VAC 60Hz, 1 second duration terminals to case.
Chemical Resistance : Unit is resistance to water, salt, alcohol, ammonia, trichlorethane and most other organic solvents
可焊性 : Terminal material is selectively striped with lead-free solder for improved solderability
Soldering Heat Resistance : Per Mil-Std-202G, method 210F, test condition C & K, test condition K validated at 260°C for 25 秒
Weight : Approximately 0.5 grams
Agency Approvals : cЯUus recognized E36687
VDE approval 0631/12.83 : RoHS Compliant per EU Directive 2002/95/EC

類型:	Switch Snap Action	應用:	印刷電路板,power Suppl
Supplier Type:	Original Manufacturer	Cross Reference:	KSD-01F, KSD-05F
Media Available:	Datasheet, Photo, EDA/CAD Models	Contact Type:	D For Normally Closed & H For Normally Open
Temperature Deviation:	±3°C / ±5°C / ±7°C	Life Cycle:	10000次
最小起訂量:	1000PCS	Payment Method:	TT Or Negotiate Payment Term
交貨時間:	7 To 15 Working Days	型:	JUC-31F
Raw Material:	Sliver, Copper, 塑膠, 金屬, Aluminum	電氣額定值:	交流250V / 5一個;AC250V 10A; 交流125V / 8一個
Action Temperature Range:	0~130℃ (one Step For Every 5°C)
高光:	Bimetallic Thermostat Switch for PCB, 2A Bimetallic Thermostat Mini Thermal Switch

Mini Bimetallic Thermostat Thermal Controller Switch JUC-31F 250V 2A 0 To 130 Degree

電氣額定值	交流250V / 5一個;AC250V 10A; 交流125V / 8一個
Action Temperature range	0~130℃ (one step for every 5°C)
Recovery and action temperature difference	Operating temperature decrease by 15-45°C
Temperature deviation	±3°C / ±5°C / ±7°C
Circuit resistance	≤50毫ω (Initial value)
絕緣電阻	≥100mΩ (DC500V Normal State)
介電強度	AC50Hz 1500V / min, no breakdown blinding (正常狀態)
Life cycle	10000 次
觸點類型	D for Normally closed & H for Normally open
交貨時間	7 自 15 working days
最小起訂量	1000PCS
Payment method	TT or negotiate payment term
交貨時間	7 自 15 working days
最小起訂量	500PCS
Scope of application	JUC-31F thermostat is applicable to Electric equipment, electric product, household appliance, the protection of temperature control, thermal overload in circuit board, Communication power supply , switching power supply,UPS power supply, medical power supply, fire power ,the module power supply ,audio amplifier equipment, various types of rechargeable devieces, rectifiers, inverters, welding equipment ,aerospace instrumentation electronic equipment , automation equipment ,military, Commercial product temperature control or temperature protection.

6700 TO220 Thermostat Thermal Switch Dimensions

1. JUC-31F thermostat’s Principle and structure
The product is a sensor of belonging to touch-type plastic Snap temperature thermostat ,the adoption of international TO220/Y220 standard package ,the product has high reliability ,sensitive and accurate ,體積細 ,重量輕 ,very easy to install and so on , very suitable for PCB circuit board / heat equipment/ power device installed Specification
2. JUC-31F thermal protector’s Specification
2.1. Contact load: AC 120V 1A; DC48V 1A; AC 220V 1.5A/3A; DC 24V 1.5A/3A
2.2. 觸點類型 : D for normally closed type; H for normally open type
2.3. Temperature

Operating temperature/°C	Recovery temperature/°C(lower than Operating temperature)	Error	Testing way (Speed of temperature rise and fall)
0~99	5~35	±3°C	1°C/min
100~130	7~40	±5°C	1°C/min

2.4. Overheating temperature:250 度
2.5. Contact電阻: less than 50mΩ
2.6. 絕緣電阻 : more than 100 mó（毫兆電阻）
2.7. Dielectric withstand voltage: more than 1500V
2.8. Product life: more than 10000 次
2.9. Weight:1.7 g
2.10. Action temperature deviations:+-5 度
3. The drawing of JUC-31F