產品分類
- 熱敏掣 58
- 汽車保險絲 19
- Bolt Down Fuses 7
- 熱熔斷器 29
- surface mount fuses 12
- 熱敏電阻 2
- PCB Mount Fuse Holder 27
- 線束 1
- Blade Fuse Holders 17
- 恆溫器 34
- 電熔斷器 14
- Thermal Circuit Breaker 20
- 保險絲盒座 36
- 溫度傳感器 32
產品標籤
鎧裝熱電偶傳感器
blade Fuse Holder
汽車葉片保險絲
汽車保險絲
陶瓷管保險絲
斷路器
盤式恆溫器
DS18b20溫度傳感器
電氣保險絲
快速/慢熔保險絲
保險絲盒座
玻璃管保險絲
Inline Fuse Holder
Limit Snap Disc Thermostat
Mini Circuit Breakers
電機過載保護器
電機熱保護
NTC傳感器
NTC熱敏電阻傳感器
PCB Mount Fuse Holder
PPTC Resettable Fuse
PT100溫度傳感器
PTC熱敏電阻
傳感器連接器線束
傳感器探頭 & 電纜
慢熔斷微型保險絲
Surface Mount Fuses
溫度截止鏈路
溫控掣
溫度保險絲
溫度傳感器
溫度傳感器電纜
溫度傳感器探頭
溫度開關
熱熔斷器
熱切斷掣
熱熔斷器
熱保護器
熱敏掣
熱敏電阻傳感器探頭
Digital DS18B20 Temperature Sensor Module Kit Waterproof 100CM Sensor Cable
The China Custom Digital temperature sensors come with the original DS18B20, high quality in a stainless steel housing (6 * 30mm) and 3m #24 30# 2651, UL4411 28# Silicone cable (120 inches) in length.
類別: 溫度傳感器
標籤: DS18b20溫度傳感器, 傳感器探頭 & 電纜, 溫度傳感器, 溫度傳感器電纜, 溫度傳感器探頭
1-Wire interface Digital DS18B20 Temperature Sensor, Usable temperature range: -55 to 125°C (-67°F to +257°F) · 9 to 12 bit . DS18B20 3M Cable Digital Temperature Thermal Waterproof Probe Sensor -55°C to +125°C compatible with Arduino and Raspberry Pi Open Source Programming!
The China Custom Digital temperature sensors come with the original DS18B20, high quality in a stainless steel housing (6 * 30mm) and 3m #24 30# 2651, UL4411 28# Silicone cable (120 inches) in length.
DS18B20 temperature sensor will enable you to easily measure and read the temperature via available and open-source libraries.
Our DS18B20 temperature sensor is perfect to use with Arduino and Raspberry Pi and other microcontrollers, and due to waterproof cable is also suitable for outdoor use.
Simple temperature readout through ready-to-use open source libraries for the DS18B20 temperature sensor! Wide measuring range from -55°C to +125°C and low deviation of only +/- 0.5°C between -10°C and +85°C!
Product Name: | 1-Wire DS18B20 Temperature Sensor | Output: | Digital Sensor |
Cable: | Customized | Voltage Supply: | 3.0V~5.5V |
Operating Temperature: | -55°C ~ 125°C | Max Power: | 450mW |
Shell Material: | Stainless Steel | Connector: | 2.54MM Connector |
Drivepipe: | Heat Shrinkable Tube | Feature: | Waterproof |
High Light: | 5.5VDC DS18B20 Temperature Sensor use with Arduino and Raspberry Pi |
Product Description
Stainless Steel Package Waterproof Probe NTC Digital Temperature Sensor DS18B20 Temperature Sensor
Output: Digital
用法: Temperature measurement use with Arduino and Raspberry Pi
Cable length: Custom 0.5M, 1M, 2M or more
Theory: Resistance Sensor
Probe material: Stainless Steel
Accuracy: -10~+125℃, the accuracy is±0.5℃
Cable material: PVC, Silicone,PTFE
Description of Digital DS18B20 Temperature Sensor
DS18B20 temperature sensor is composed of DALLAS, Stainless steel probe, cable and connectors. DS18B20 is a commonly used digital temperature sensor, and its output is digital signal. It has the characteristics of small size, low hardware overhead, strong anti-interference ability and high precision.
Specification of Digital DS18B20 Temperature Sensor
Digital chip | DS18B20 |
Power supply | 3.0~5.5VDC |
Resolution ratio | 9~12 bit, Corresponding distinguish temperature are 0.5℃,0.25攝氏度,0.125℃ and 0.0625℃ |
Tolerance | -10℃ to +125℃ ±0.5℃ |
Treatment proccess | Waterproof |
Operating temperature range | -50~+125℃ (when the temperature is -10~+85℃, the accuracy is±0.5℃) |
Shell size | Diameter:¢6~¢9mm,length : 10mm~1000mm |
Wire | UL Series(such as UL1007), Supply line number, using temperature range, outside diameter and material requirements. |
Shell material | Stainless steel |
Connector | Molex, JST, DuPont, CWB, CJT, U type etc. |
Drivepipe | Heat shrinkable tube; PVC tube, glass fiber tube; |
Connection mode | Black : GND, Yellow: DATA Red:VDD+ |
Characteristic of Stainless Steel Digital DS18B20 Temperature Sensor
1. Digital signal output
Wire interface Requires Only one port pin for communication. Requires no external components
2. High Accuracy
Operating temperature range:-55°C to +125°C (-67F to +257F), ±0.5°C accuracy from -10°C to +85°C
3. Data Line Power Supply
Can be powered from data line. Power supply range is 3.0V to 5.5V
4. Fast Response
Thermometer resolution is programmable from 9 to 12 bits.
5. Various Probe Design
Probe dimension :6*30mm, 6*50mm or customized
Application of Waterproof Digital DS18B20 Temperature Sensor
Water Temperature Monitoring, HVAC, Medical Instrument, GPS Oil Tank Temperature Monitoring
FAQ of DS18B20 Temperature Sensor
Q: Where physically on the device does the temperature measurement take place?
一個: The DS18B20 does not sense temperature directly through the package. For all package types, the DS18B20 senses temperature primarily through the GND pin. Ensuring a good thermal connection between the GND pin of the device and the heat source you wish to measure will provide the best results.
Q: Is there a way to extend the temperature range of the DS18B20?
一個: No, there is not a way to increase the range it reads. The DS18B20 reads with an accuracy of ±0.5°C from -10°C to +85°C and ±2°C accuracy from -55°C to +125°C.
聯繫我哋
等待您的電子郵件, 我哋會在內回覆您 12 數小時,提供您需要嘅寶貴信息.
相關產品
Thermistor temperature sensor for electrical appliances
As everyone knows, the Small appliances , as a popular household kitchenware, not only has the function of heating, but also has many automatic functions. For example, automatic heat preservation, automatic boiling water, automatic rice cooking, automatic soup cooking and other functions. The realization of all these automatic functions requires the Small appliances to be able to accurately measure and control the temperature. The existing Small appliances mainly uses a temperature sensor for temperature measurement. Such as: