產品分類
- 熱敏電阻 1
- PCB Mount Fuse Holder 27
- 線束 1
- Blade Fuse Holders 17
- 恆溫器 34
- 電熔斷器 14
- Thermal Circuit Breaker 20
- 保險絲盒座 36
- 溫度傳感器 30
- 熱敏掣 58
- 汽車保險絲 19
- Bolt Down Fuses 7
- 熱熔斷器 29
- surface mount fuses 12
產品標籤
鎧裝熱電偶傳感器
blade Fuse Holder
汽車葉片保險絲
汽車保險絲
陶瓷管保險絲
斷路器
盤式恆溫器
DS18b20溫度傳感器
電氣保險絲
快速/慢熔保險絲
保險絲盒座
玻璃管保險絲
Inline Fuse Holder
Limit Snap Disc Thermostat
Mini Circuit Breakers
電機過載保護器
電機熱保護
NTC傳感器
NTC熱敏電阻傳感器
PCB Mount Fuse Holder
PPTC Resettable Fuse
PT100溫度傳感器
PTC熱敏電阻
傳感器連接器線束
傳感器探頭 & 電纜
慢熔斷微型保險絲
Surface Mount Fuses
溫度截止鏈路
溫控掣
溫度保險絲
溫度傳感器
溫度傳感器電纜
溫度傳感器探頭
溫度開關
熱熔斷器
熱切斷掣
熱熔斷器
熱保護器
熱敏掣
熱敏電阻傳感器探頭
風筒SEKI ST-12微動式熱敏掣
風筒嘅過熱保護SEKI ST-12係一種溫度控制器,使用雙金屬片作為溫度傳感元件. 防止風筒長時間運行時電熱絲過熱和燒壞.
風筒嘅過熱保護SEKI ST-12係一種溫度控制器,使用雙金屬片作為溫度傳感元件. 防止風筒長時間運行時電熱絲過熱和燒壞.
When the hair dryer works normally, the bimetal is in a free state and the contacts are in a closed / open state. When the temperature reaches the operating temperature, the bimetal will quickly act upon the internal stress caused by the heat, opening / closing the contact and cutting / connecting the circuit, thereby controlling the temperature. When the appliance cools down to the reset temperature, the contacts are automatically closed / opened to resume normal working conditions.
The following points should be noted when installing anti-overheating protection SEKI ST-12:
1. When using contact temperature-type installation, the metal cover should be close to the installation surface of the controlled appliance. In order to ensure the effect of temperature sensing, the surface of temperature sensing should be coated with thermal grease or other thermally conductive medium with similar properties.
2. Do not collapse, loosen or deform the top of the cover during installation, 以免影響性能.
3. Do not allow liquid to penetrate into the thermostat, do not make the shell crack, and do not change the shape of the external terminal at will.
4. The product is used in a circuit with a current not greater than 5A, and the copper core cross section should be selected as 0. 5-1㎜2 wire connection; For use in circuits with a current not greater than 10A, the copper core cross section should be 0.75-1.5㎜2 wire connection.
5. The product should be stored in a warehouse with a relative humidity of less than 90%, an ambient temperature below 40 °攝氏度, ventilated, 乾淨, dry and non-corrosive gas
product description
model:
ST-12 series temperature switch Scope
⑴ hair dryer,
⑵ curlers,
⑶ oven,
⑷ electric heaters,
⑸ popcorn machine,Overheating protection SEKI ST-12
⑹ tableware dryer temperature protection, and other products.
● ST-12 Series Temperature Switch Description:
ST-12 Series Temperature Switch Technical Data
Rated temperature Off temperature Rated temperature Off temperature
55℃ 55±5℃ 105℃ 105±5℃
60℃ 60±5℃ 110℃ 110±5℃
65℃ 65±5℃ 115℃ 115±5℃
70℃ 70±5℃ 120℃ 120±5℃
75℃ 75±5℃ 125℃ 125±5℃
80℃ 80±5℃ 130℃ 130±5℃
85℃ 85±5℃ 135℃ 135±5℃
90℃ 90±5℃ 140℃ 140±5℃
95℃ 95±5℃ 145℃ 145±5℃
100℃ 100±5℃ 150℃ 150±5℃
Reset temperature: When below 75 攝氏度, operating temperature, operating temperature reset temperature of minus 20 ℃ ± 15 攝氏度
When the operating temperature at 75 °C ~ 100 攝氏度, operating temperature reset temperature of minus 30 ℃ ± 15 攝氏度
When the operation temperature above 100 攝氏度, operating temperature reset temperature is minus 40 ℃ ± 15 攝氏度
Rated voltage (V) Rated Current (一個)
10125250571015
By certified
⑴ the thermal protection adapted for relative humidity less than 90℅, non-flammable gas and conductive dust exist in general indoor environment.
⑵ thermal protector in the installation process, do not pull pressure shrapnel thermal sensor in order to avoid poor contact, inaccurate temperature.
⑶ prevent dangerous over-temperature components under fault conditions to avoid accidents.
聯繫我哋
等待您的電子郵件, 我哋會在內回覆您 12 數小時,提供您需要嘅寶貴信息.