Micro medical radiofrequency ablation electrode temperature sensor

Medical surface temperature sensor
Product introduction:
φ0.30mm PI tube packaged medical temperature sensor. This product is a miniature medical radiofrequency ablation electrode temperature sensor. The product uses a polyimide tube with an outer diameter of Maxφ0.30mm to encapsulate epoxy resin, and the lead wire uses an enameled wire with an outer diameter of 0.05mm. The resistance value of the miniature thermistor sensor is calibrated one by one.

Medical surface temperature sensor, complete product models, reliable quality. 1K to 680K resistance optional, service life up to 10 年. Medical-grade temperature sensor, automotive sensor, home appliance sensor chip uses high-precision chip, the response time can reach 0.5 秒.

The chip is epoxy encapsulated and can be equipped with a 6.3mm mono audio plug (other plugs can also be equipped according to customer requirements). The measurement temperature tolerance is within (25℃~45℃)±0.1℃, compatible with YSI400 series temperature sensors.

產品特點
PI maxφ0.30mm
Enameled wire OD0.05mm
Quick response
工作溫度範圍: 0℃~100℃

Product application
Monitoring ablation temperature detection

Product structure and size (Unit: 毫米)

Selection of medical temperature sensor

Medical temperature sensor

Temperature sensor for monitoring ablation temperature detection

Packing quantity: 1 pcs/packing

2.252kΩ or 10kΩ RT temperature resistance table for medical sensors

Monitoring ablation temperature detection temperature sensor product structure and size

Precautions
— Purpose of this product: temperature measurement and control.
— Control the energy dissipation generated by the current flowing through the chip within the required range to avoid measurement errors caused by self-heating of the component.
— If the shrink sleeve is heated at the temperature sensing head, the air outlet of the welding gun should be more than 30mm away from the temperature sensing head to avoid excessive thermal shock of the resistor body caused by high temperature, resulting in resistance drift.
— Storage temperature 0℃～50℃, humidity 30%~80%RH; avoid storage in an environment with corrosive gas or direct sunlight; after opening the package, it needs to be resealed for storage.
— In view of the structural characteristics of epoxy components, users should avoid excessive stretching and bending forces from the lead wires on the component encapsulation head when using it. If the lead wire needs to be bent, the bending point or force point should be controlled on the lead wire 6mm below the encapsulation head to avoid pulling the chip, causing resistance drift or even open circuit, especially when the component is heated.

服務業
1. 您的詢問將在 24 小時;
2. 訓練有素且經驗豐富的員工隨時為您服務.
3. 獨特設計嘅產品同眾多嘅私人模具產品等待您的選擇.
4. 嚴格保護您的私隱信息和您的設計理念.

常見問題

問1. 我可以訂購NTC嘅樣品啊, PT100、PT1000, RTDs （熱電阻）, 同Ds18b20傳感器?
一個: 係, 我哋歡迎樣品訂單測試和檢查質素. 混合樣品係可以接受嘅.