產品分類
- 保險絲盒座 36
- 溫度傳感器 30
- 熱敏掣 58
- 汽車保險絲 19
- Bolt Down Fuses 7
- 熱熔斷器 29
- surface mount fuses 12
- 熱敏電阻 1
- PCB Mount Fuse Holder 27
- 線束 1
- Blade Fuse Holders 17
- 恆溫器 34
- 電熔斷器 14
- Thermal Circuit Breaker 20
產品標籤
鎧裝熱電偶傳感器
blade Fuse Holder
汽車葉片保險絲
汽車保險絲
陶瓷管保險絲
斷路器
盤式恆溫器
DS18b20溫度傳感器
電氣保險絲
快速/慢熔保險絲
保險絲盒座
玻璃管保險絲
Inline Fuse Holder
Limit Snap Disc Thermostat
Mini Circuit Breakers
電機過載保護器
電機熱保護
NTC傳感器
NTC熱敏電阻傳感器
PCB Mount Fuse Holder
PPTC Resettable Fuse
PT100溫度傳感器
PTC熱敏電阻
傳感器連接器線束
傳感器探頭 & 電纜
慢熔斷微型保險絲
Surface Mount Fuses
溫度截止鏈路
溫控掣
溫度保險絲
溫度傳感器
溫度傳感器電纜
溫度傳感器探頭
溫度開關
熱熔斷器
熱切斷掣
熱熔斷器
熱保護器
熱敏掣
熱敏電阻傳感器探頭
PCB-Bimetal Disc Thermostat TO-220 Thermal Cutoff Switch
China Custom Inch Hi-Amp 2A~7.5Amp 1/2 TO-220 PCB Disc Thermostat Brand (JUC 31F, 6700, 67F070, KSD-01F) Choice and Price Advantage. Global high current ST01 B U6 TO-220 Thermal Cutoff Switch certifications include: UL認證, CUL, CQC質素控制, TUV公司, CB.
China Custom Hi-Amp 2A~7.5Amp 1/2 Inch TO-220 PCB Disc Thermostat Brand (JUC 31F, 6700, 67F070, KSD-01F) Choice and Price Advantage. TO-220 PCB Thermal Cutoff Switch are subminiature bimetal thermostats that can be mounted on a PCB. They can be used for a variety of applications, including: Heat-sink sensing, Power component monitoring, Power supplies, and Air-sensing on PCBs.
Here are some examples of TO-220 PCB Thermal Cutoff Switch thermostats:
JUC 31F/ 6700 Series: A lead-free, SPST Thermal Cutoff Switch thermostat with an operating range of 104º F to 266º F;
KSD-01F: A normally closed thermal switch that opens at 203º F;
JUC 31F Series: A RoHs compliant, snap action SPST bimetallic Temperature Control Switch;
67L090: A subminiature PCB mount Thermal Control Switc thermostat that closes on rise 90C.
China Custom Low TEMPERATURE TO-220 Disc Thermostat AS LOW AS 0C (32F). The JUC-31F series is a RoHs compliant, snap action SPST bimetallic thermostat which provides accurate sensing capabilities in a single device.
The 67F070, KSD-01F Series confirms to IEP standards Y220/TO220. Therefore they may be automatically placed and soldered in a pick/place applications, ideal for printed circuit boards Factory calibrated 0C-130C in 5C increments.
This bimetal discThermal Cutoff Switch is designed for surface or air sensing for printed circuits and heat sinks and is available in normally open or normally closed configuration. Other features include:
Temperature range 0C – 155 C
Rohs compliant per EU directive 2002/95/EC, UL認證, TUV公司, UL認證
TO-220 international electronic package standard
100K cycles rating
TO-220 PCB Disc Thermostat Applications
Power supplies
Medical devices
Test equipment
Refrigeration
HVAC
PCB
TO-220 PCB Disc Thermostat Main parts
1) Ceramic cover plate 2) stationary silver contact 3) spring disc 4) movable contact 5) Conductive housing 6) bimetal disc
TO-220 PCB Disc Thermostat Construction
Stationary silver contact are riveted with ceramic cover plate. The movable contact are welded to the spring disc, which is in the shape of a cross, and the four feet are connected to the bottom of the housing. The inner hole of the bimetal disc is placed on the spring disc through the movable contact. The current pass through the stationary silver contact to the movable contact, and then connects the conductive housing through spring discs to form a loop.
TO-220 PCB Disc Thermostat Function
When the circuit is normal, the movable contact is in close contact with the stationary silver contact under the pre-pressure of the spring disc. When the rated operating temperature is reached, the bimetal disc is deformed by heat, snaps into its inverted position and pushes the spring disc downwards. The contact is abruptly opened and the temperature rise of the device to be protected is disrupted.
After the circuit is disconnected, the ambient temperature begins to fall. When it reaches the defined reset temperature, the bimetal disc and the spring disc snaps back into its start position, the movable contact and the stationary silver contact will close again, and the circuit returns to the conduction state.
TO-220 PCB Disc Thermostat PARAMETER
Nominal switching temperature (NST) in 5°C : 60 °C – 180 °C
Tolerance (standard): ±5K
Reverse switch temperature (RST) tolerance: ≥ 35 °C (≤ 80°C NST)
-30K±15K (≥ 85°C ≤ 180° C NST) :Thickness 5.6mm /Diameter 9.8mm
Length of the insulation cap: 18.3mm
Resistance to impregnation:suitable
Suitable for installation in protection class: I+ll
Pressure resistance to the switch housing:300N
Standard connection :0.33 mm² / AWG22
Insulation voltage:1.5 kV
Operating voltage range AC/DC:up until 500 V AC / 14 V DC
Rated voltage AC:250 V(VDE) ,277 V(UL認證)
Rated current AC cos ϕ = 1.0 /cycles: 2.5一個 / 10,000
Max. switching current AC cos ϕ = 1.0 /cycles: 6.3 一個 / 3,000, 7.5 一個 / 300
Rated current AC cos ϕ = 0.6 /cycles:1.6 一個 / 10,000
Rated voltage DC: 12.0 V
Max. switching current DC /cycles: 40.0 一個 / 5,000
Total bounce time:< 1 ms
Contact resistance: ≤ 50 mΩ
Vibration resistance at 10 … 60 Hz:100 m/s²
Available approvals: UL/TUV/CQC/CB
聯繫我哋
等待您的電子郵件, 我哋會在內回覆您 12 數小時,提供您需要嘅寶貴信息.
相關產品
China Custom Limit Disc Thermostat Control Switches Therm o-Disc
Snap Disc, or 3/4" Limit switch thermostats (KSD301/KSD302/KSD304/KSD308) are bimetal mechanical thermostats that function via the thermal expansion and contraction of a bimetal disc that “snaps” from a convex to a concave shape at a set temperature. carrying up to AC 110V/400V, 10A-60A amps-240 Volts, Action mode: automatic reset, manual reset (normally open/normally closed).
China SPST Bimetal Limit Snap Thermal Switch Supplier
SPST-NO/NC Bimetal thermal switch Applications include electric motors, heater, 變形金剛, thermal coils, electronics, HVAC, and white goods. China Custom Limit Snap bimetal thermal switch (250v 10a / 125v 16a) is a temperature sensing device which is made with a formed 1/2′′ or 3/4′′ bi-metal disc that “snaps” at a preset temperature.
China TO-220 Disc Thermostat Thermal Switch Supplier
China Custom TO-220 Thermal Cutoff Switch JUC-31F/ KSD-01F instead Airpax® 6700 series Subminiature Thermostat. JUC-31F/ KSD-01F is a RoHS compliant, positive snap action, single pole / single throw, a subminiature bimetallic thermostat that provides accurate and reliable sensing and switching in a single device.
KSD302 20A Bipolar Bimetal Thermostat Manual Reset Thermal Control Heater 93c
The KSD302 series comprises a wide range of Bipolar bimetallic thermostats, with extremely compact dimensions and fitted with a snap-action trip device. Big current, High power KSD302 Bimetallic Thermostat Temperature Switch 250V 15A To 60A. US ... Efficient Mini Thermal Switch , Bipolar Bimetallic Thermal Thermostat.
TO-220 PCB-Bimetal Disc Small Thermal Protection Thermostat
JUC 31F / ST01 B U8 Series TO-220 PCB-Bimetal Disc Thermostat: A snap action SPST bimetallic thermostat that meets RoHs standards.
JUC 31F / ST01 B U8, 6700 Series TO-220 Subminiature Thermostat: A subminiature bimetal disc thermostat with a contact resistance of 50 milliohms max. It has a switch capability of up to 2 amp for 48 VDC or 120 VAC for 30,000 cycles.