乜嘢係數字溫度傳感器? DS18B20傳感器探頭嘅設計

A digital temperature sensor is a device that measures temperature and converts it into a digital reading that can be input into a microcontroller or other logic device. DS18B20 Digital temperature sensors use integrated circuits to provide accurate temperature readings. They are often used in consumer electronics, such as digital thermometers. DS18B20 is a commonly used digital temperature sensor probe chip, which outputs a digital signal. It has the characteristics of small sensor probe, low hardware design requirements, strong anti-interference ability and high precision. The DS18B20 digital temperature sensor is easy to wire, and can be used in many occasions after the probe is packaged. Such as pipeline type, 螺紋型, magnet adsorption type, stainless steel package type, various models, including LTM8877, LTM8874, 等.
The appearance of the probe is mainly changed according to different application occasions. The packaged DS18B20 can be used for cable trench temperature measurement, blast furnace water circulation temperature measurement, boiler temperature measurement, machine room temperature measurement, agricultural greenhouse temperature measurement, clean room temperature measurement, ammunition depot temperature measurement and other non-extreme temperature occasions. Wear-resistant and collision-resistant, 體積細, 簡單易用, various packaging forms, suitable for various small space equipment digital temperature measurement and control fields.

DC 12V LED Digital Thermometer Temp Sensor Meter NTC Probe -50 ~ 110°C Detector

Range(-55℃~ +125℃) 6mm Temperature Probe Sensors for Arduino Measuring The Air Temperature, Liquids DS18B20-3M-5

Warehouse Series Digital Probe Stainless Steel Encapsulated SNS-TMP DS18B20 with 1 米

These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. Its main features include:

‌High-precision measurement‌: DS18B20 provides 9-bit to 12-bit Celsius temperature measurement accuracy and supports multi-point temperature measurement networks‌.
‌Single-wire communication protocol‌: Data communication and power supply are carried out through a single data line, which simplifies hardware design‌.
‌Wide operating voltage range‌: Supports operating voltages from 3.0V to 5.5V, suitable for battery-powered applications‌.
‌Wide application fields‌: It has wide applications in consumer electronics, industrial control, 環境監測等領域, such as temperature display of household appliances, precise industrial measurement, etc.‌.

Application scenarios
DS18B20 digital temperature sensors have a wide range of applications in many fields, 包括:

‌Household appliances‌: Used for temperature display and control, providing accurate temperature measurement.
‌Industrial control‌: Provides reliable solutions in precise industrial measurement.
‌Environmental monitoring‌: Suitable for various environmental monitoring occasions, such as temperature measurement in machine rooms, agricultural greenhouses, ammunition depots, etc.‌12.

DS18B20防水溫度傳感器探頭 + 帶導線組嘅端子適配器糢塊

IP68 waterproof stainless steel temperature probe 18B20 to 485 temperature sensor

Digital LCD Fridge Thermometer Water Temperature with DS18B20 sensor Probe Fahrenheit

Hardware connection method
When connecting DS18B20 to a microcontroller, you need to follow the following basic steps:
‌Determine the pin function‌: DS18B20 has three pins, namely VDD (power), DQ (data line), 接地 (ground line)‌.
‌Power connection‌: The VDD pin is connected to a 3.3V or 5V power supply, depending on the operating voltage of the microcontroller‌.
‌Data line connection‌: The DQ pin is connected to VCC through a pull-up resistor (typical value is 4.7kΩ).
‌Ground connection‌: The GND pin is directly connected to the ground line of the microcontroller‌.

The temperature sensor supports the “one-wire bus” interface (1-Wrie), the measurement temperature range is -55 °C ~ +125 °C, in the range of -10 °C ~ +85 °C, the accuracy is plus or minus 0.5 °C
Adjustable resolution: 9 – 12 bit; 溫度範圍: -55 ℃ to +125 攝氏度; Output : red (VCC), yellow (DATA), 黑 (接地)
DS18B20 temperature sensor: the size of stainless steel housing is approx. 6 x 50 mm/ 0.2 x 2 inch, and the digital temperature thermal cable has a total length of approx 1 m/ 39.4 inch, which is long enough to meet your needs.
YAXUN DS18B20 temperature sensor is compatible with Raspberry Pi, and is widely applied in temperature monitoring of cable trench, 鍋爐, zer, agricultural greenhouse, clean room, 等.