產品
probe & cable of thermal resistance sensor
The probe & cableof platinum resistance sensor: stainless steel probe package, thread, magnetic body package, spring top tight, ABS shell, glass fiber and other waterproof protection temperature probes and High temperature wire silicone braided cable, mica wire, glass fiber wire, electronic wire, Teflon wire.
Production of platinum temperature sensor
STT-M series temperature sensors Probe are packaged with magnetic bodies. For paramagnetic metal surfaces, it can be easily sucked to the surface for temperature measurement and can be easily installed and removed. It is suitable for the detection of the key point temperature of large equipment before leaving the factory, and other occasions where the temperature detection point needs to be replaced frequently, so as to improve the efficiency of temperature detection
PT100型 / PT1000 RTD帶過程連接嘅溫度傳感器探頭
China-made PT100/PT1000 platinum thermal resistor temperature sensor. The localization process of PT100/PT1000 platinum thermal resistor temperature sensor is accelerating as the international situation is pressing. It came into being to cooperate with many companies to fully localize platinum thermal resistors.
PT100型 / PT1000 Temperature Sensor Cable for Electrical Appliances
作為常見嘅傢用電器, 消毒櫃廣泛用于家庭和商業場所嘅食品消毒和保健. 在消毒櫃中, PT1000溫度傳感器係精確測量和控制消毒櫃內溫度嘅非常重要嘅設備.
PT100 RTD傳感器探頭 & 電纜
PT100熱電阻採集糢塊可以透過隔離嘅 485 通訊接口. RS-485允許高達 32 PT100熱阻採集糢塊將懸掛喺同一總線上. 然而, if Link-Max’s RS-485 repeater is used, 為止 256 PT100熱阻採集糢塊可以連接到同一網絡, 最大通信距離為1200m.
PT100焗爐用溫度傳感器燒烤探頭 / 燒烤 / 烤肉 / 油炸 / 吸煙者
PT100 BBQ probe Meat thermometer provides an instant readout of inner food temperature during a cooking cycle without opening the Oven / 燒烤 / 油炸 / 吸煙者; 溫度範圍: 14 自 450 華度; -10 自 232 攝氏度; Probe cord heat resistant up to 700 華度
Pt100 temperature sensor for military equipment
Aerospace: In the aerospace field, PT100 sensors are used to measure the temperature of liquid oxygen and liquid hydrogen combustion chambers, turbine engines, fuel cells, 等. of aircraft and spacecraft. 高精度, high reliability and strong stability are required.
PTF 30 5mΩ Fuse holder for cylindrical fuses 5x20mm 10A on panel
5x20MM cylindrical Fuses PTF 30 Fuse holder in miniature design; Panel mounting and solder connection; Finger-grip and screwdriver slot equipped fuse carrier with screw socket. This panel mount fuse holder is ideal for mounting through 0.8mm to 2.8mm panel walls, is UL rated at 20 amps at 250 volts and has solder connectors. The finger grip cap holds the 5x20mm glass fuses.
PTF 70 Bakelite fuse holders, 10一個, panel mount fuse Box, for 5x20mm Fuse
The Stelvio Kontek PTF-70 is a panel mount fuse holder with a screw cap for use with 5 x 20 mm glass fuses with a UL rating of 10A at 250Vac and uses tab wire connections.