產品類別
產品標籤
鎧裝熱電偶感測器
刀片保險絲座
汽車插片保險絲
汽車保險絲
陶瓷管保險絲
斷路器
碟式溫控器
DS18b20 溫度感測器
電氣保險絲
快熔斷/慢熔斷保險絲
保險絲盒支架
玻璃管保險絲
直插式保險絲座
限位卡盤溫控器
迷你斷路器
馬達過載保護器
馬達熱保護
NTC感測器
NTC熱敏電阻感測器
PCB 安裝保險絲座
PPTC自恢復保險絲
PT100溫度感測器
正溫度係數熱敏電阻
感知器連接器線束
感測器探頭 & 電纜
慢熔斷微型保險絲
表面貼裝保險絲
臨時截止鏈接
溫控開關
溫度保險絲
溫度感應器
溫度感測器電纜
溫度感測器探頭
溫度開關
熱切斷
熱切斷開關
熱熔斷器
熱保護器
熱敏開關
熱敏電阻感測器探頭
5X20mm 125v/250v Ceramic Fuses with lead, (3/16 inch X 3/4 inch)
5x20mm Ceramic Fuse selection and application: The types of fuses are commonly wire fuses, glass fuse tubes, quartz sand fuses, insert fuses, ETC. The different forms have different usage environments.
The rated current of 5x20mm fuses with different wire diameters is also different.
When selecting and adapting fuses, they will be affected by voltage and current, resulting in differences. From the voltage type: generally there are three types of high-voltage fuses, low-voltage fuses, and electronic circuit fuses. Differentiate from the current level: generally ranging from 0.5A to 100A.
In the process of selecting fuses, in addition to the above content, two types of overcurrent protection and overheating protection should be distinguished. Overcurrent protection: It is the most commonly used current limiting fuse. Overheating fuse: It plays a protective role when the temperature is too high. It is generally used in electrical appliances with heating and temperature control requirements. 例如, 吹風機, 電熱水壺, 電熨斗, thermal relays, ETC.
The configuration of the fuse, its current size is the key measurement indicator of the protection function. Attention should be paid to the four current values of normal current (rated current), fuse current, short-circuit current, and impact current. Its rated current is generally 1-1.2 times the current of the protected circuit.
Breaking Capacity | Material | Operating Temperature | Soldering conditions |
VDE:35A or 10ln whichever is greater(250mA-6.3A) UL:50 amperes at 125V/250V AC (250mA-10A) |
Fuse body –glass tube End cap –nickel plated brass Pigtail–tin plated copper on nickel plated brass cap |
-40℃~+125℃ | Wave solder:260℃,≤5S Hand solder: 360℃,≤1S |
Functional Characteristics
Testing current | Blow Time | |
Min | Max | |
150% | 1 hour | – |
210% | 100多發性硬化症 | 1800s |
275% | 10多發性硬化症 | 3s |
400% | 3多發性硬化症 | 300多發性硬化症 |
1000% | – | 20多發性硬化症 |
Approvals(○ Pending ● Approvals)
Current Rating | 額定電壓 | Norminal Melting I2T(A2sec) |
Approvals | ||||
VDE | CQC | UL | PSE | KC | |||
250毫安 | 125V/250V | 0.14 | ● | ● | ● | ● | |
300毫安 | 125V/250V | 0.20 | ● | ||||
315毫安 | 125V/250V | 0.23 | ● | ● | ● | ● | |
350毫安 | 125V/250V | 0.27 | ● | ||||
400毫安 | 125V/250V | 0.38 | ● | ||||
500毫安 | 125V/250V | 0.50 | ● | ● | ● | ● | |
600毫安 | 125V/250V | 0.72 | ● | ||||
630毫安 | 125V/250V | 0.9 | ● | ● | ● | ● | |
750毫安 | 125V/250V | 1.2 | ● | ||||
800毫安 | 125V/250V | 1.6 | ● | ● | ● | ● | |
1A | 125V/250V | 2.4 | ● | ● | ● | ● | ● |
1.25A | 125V/250V | 3.5 | ● | ● | ● | ● | ● |
1.5A | 125V/250V | 4 | ● | ● | |||
1.6A | 125V/250V | 7.2 | ● | ● | ● | ● | ● |
2A | 125V/250V | 9.6 | ● | ● | ● | ● | ● |
2.5A | 125V/250V | 16 | ● | ● | ● | ● | ● |
3A | 125V/250V | 17.8 | ● | ● | |||
3.15A | 125V/250V | 22 | ● | ● | ● | ● | ● |
3.5A | 125V/250V | 28 | ● | ● | |||
4A | 125V/250V | 45 | ● | ● | ● | ● | ● |
5A | 125V/250V | 62 | ● | ● | ● | ● | ● |
6A | 125V/250V | 70 | ● | ||||
6.3A | 125V/250V | 72 | ● | ● | ● | ● | |
7A | 125V/250V | 88 | ● | ||||
8A | 125V/250V | 110 | ○ | ○ | ● | ○ | |
10A | 125V/250V | 144 | ○ | ○ | ● | ○ |
聯絡我們
等待您的電子郵件, 我們將在短時間內回覆您 12 小時提供您所需的有價值的信息.
相關產品
RS PRO 5x20mm Cartridge Fast~slow Blown Fuses with lead
Miniature 5x20mm Medium-Acting Glass Body Fuse
VAC (V): 250
Nominal Melting I2T (A2sec): 0.005, 0.009, 0.011, 0.017, 0.031, 0.057, 0.085, 0.12, 0.13, 0.16 more
Resistance (哦): 0.01167, 0.01578, 0.03045, 0.04515, 0.0551
What are the different sizes of glass fuses?
AGA, SFE 4. (1/4" x 5/8")
SFE 6. (1/4" x 3/4")
AGW, SFE 7.5, SFE 9. (1/4" x 7/8")
AGX. (1/4" x 1")
SFE 14. (1/4" x 1-1/16")
AGC, SFE 20, UK. (1/4" x 1-1/4")
AGY, SFE 30. (1/4" x 1-7/16")
AGU. (13/32" x 1-1/2")