產品類別
產品標籤
鎧裝熱電偶感測器
刀片保險絲座
汽車插片保險絲
汽車保險絲
陶瓷管保險絲
斷路器
碟式溫控器
DS18b20 溫度感測器
電氣保險絲
快熔斷/慢熔斷保險絲
保險絲盒支架
玻璃管保險絲
直插式保險絲座
限位卡盤溫控器
迷你斷路器
馬達過載保護器
馬達熱保護
NTC感測器
NTC熱敏電阻感測器
PCB 安裝保險絲座
PPTC自恢復保險絲
PT100溫度感測器
正溫度係數熱敏電阻
感知器連接器線束
感測器探頭 & 電纜
慢熔斷微型保險絲
表面貼裝保險絲
臨時截止鏈接
溫控開關
溫度保險絲
溫度感應器
溫度感測器電纜
溫度感測器探頭
溫度開關
熱切斷
熱切斷開關
熱熔斷器
熱保護器
熱敏開關
熱敏電阻感測器探頭
88A Manual Reset Protector KUOYUH MINI Overcurrent Protector Breaker
88A series equipment manual reset circuit breakers (commonly known as motor overcurrent protectors) are suitable for AC 50/60Hz, rated working voltage to 250Vac, DC 32Vdc, rated current to 3A-20A for additional overload protection in the internal branch circuit of electrical equipment, a key part of the product The temperature sensing protector.
88A series equipment manual reset circuit breakers (commonly known as motor overcurrent protectors) are suitable for AC 50/60Hz, rated working voltage to 250Vac, DC 32Vdc, rated current to 3A-20A for additional overload protection in the internal branch circuit of electrical equipment, a key part of the product The temperature sensing protector. 88 Series Push-to-Reset circuit breaker is a unipolar, single-push reset thermal protector product, used to protect motor equipment.
Product name: 88一連串
rating :3A-20A;
(Input Power):125VAC/250VAC/32VDC 50-60Hz;
(Withstand voltage strength):1500VAC/1min;
Leakage current: ≤0.5mA(1500VAC/min,the leaked current is less than≤0.5mA);
(Insulation Resistance):500VDC1Min≥100MΩ;
(Rated short-circuit capacity):125VAC/1000A,250VAC/1000A;
(Rated breaking capacity): 6 times rated current;
(reset): Manual Push Reset;
(Reset Time): Within 60s”;
Tripping characteristics
(The test environment temperature):25℃±3℃;
(200% of Ratcd Currcnt): 5-30s” Seconds Trip;
(150% of Rated Current): Trip within 1 Hour;
(100% of Rated Current): Hold, No Trip ;
Main Technical Parameters
額定電流 | 125/250VAC |
32直流電壓 | |
Rated Voltage | XXA |
Interrupt Capacity | 1000A(UL1077) |
Insulation Resistance | 500VDC 5s″, insulation resistance≥100ΜΩ |
Dielectric Strength | 1500VAC/min |
Reset Time | within 60S |
重設類型 | 手動復位 |
Mechanical/Environmental Data
Working temperature: -10℃ to 60℃
Terminal: Quick-connect terminal or solder terminal
Nut: a variety of options, see product appendix and diagram
Terminal temperature rise: rated current <65℃ (ambient temperature is 25℃)
觸點壽命: >500Cycles at rated current and 125VAC×150%
Table of Environmental Correction Factors
(Derating Factor) | |
-5℃ | (3A-4A)×1.2, (5A-30A)×1.12 |
+40℃ | (3A-4A)×0.92,(5A-30A)×0.94 |
The time current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping. Please multiply the current brea ker current ratings by the derating factor shown below
Example:
Normal Continuous Current= 10A
Ambient Temperature = 45 ℃
Multiplication Factor = 0.85
Recommended Rating=10A/0.85=11.8A
Select the Nea rest Rating = 12A
OVERLOAD | TRIP TIME |
150% | Trip in a hour |
200% | 5.0-30.0 SEC |
300% | 1.2-12.0 SEC |
400% | 0.6-5.0 SEC |
500% | 0.4-2.8 SEC |
600% | 0.3-1.8 SEC |
800% | 0.18-0.9 SEC |
1000% | 0.12-0.7 SEC |
Performance form of the experiment
Max Resistance V.S.Current Rating at 25℃ | Derating Factor | ||
Temperature | Rating Amp | ||
Current Rating in Amp | Max Resistance in ohms | 60℃ | X 0.6 |
3-4Amp | < 0.05 | 50℃ | X 0.7 |
5-6Amp | < 0.04 | 40℃ | X 0.8 |
7-8Amp | < 0.025 | 30℃ | X 0.9 |
9-11Amp | < 0.02 | 25℃ | X 1.0 |
12-13Amp | < 0.01 | 20℃ | X 1.1 |
14-16Amp | < 0.008 | 10℃ | X 1.3 |
17-25Amp | < 0.007 | 0℃ | X 1.5 |
Approval | File No. | 額定電流 | Rated Voltage | Standard |
CUL | E155159 | 3-30A | 125/250VAC | UL1077 |
德國萊茵TUV | B140558611005 | 3-30A | 125-250VAC | EN60934 |
32直流電壓 | ||||
CCC | 2011010307520568 | 3-30A | 125/250VAC | GB17001 |
聯絡我們
等待您的電子郵件, 我們將在短時間內回覆您 12 小時提供您所需的有價值的信息.
相關產品
92 Series Manual Reset Overload Protector Battery Circuit Breaker 32VDC 0.5A~20A
KUOYUH 92 Series Overload Protector Circuit Breaker has automatic reset protector, manual reset protector, switch and other series. It has passed CQC, 德國萊茵TUV, VDE, UL, CE, CB, SAA, KC and other certifications. It can be used for additional overload protection in branch circuits inside electrical equipment with AC 50/60Hz, rated working voltage up to 250Vac, DC 32Vdc, and rated current 0.5A to 300A.