產品類別
產品標籤
鎧裝熱電偶感測器
刀片保險絲座
汽車插片保險絲
汽車保險絲
陶瓷管保險絲
斷路器
碟式溫控器
DS18b20 溫度感測器
電氣保險絲
快熔斷/慢熔斷保險絲
保險絲盒支架
玻璃管保險絲
直插式保險絲座
限位卡盤溫控器
迷你斷路器
馬達過載保護器
馬達熱保護
NTC感測器
NTC熱敏電阻感測器
PCB 安裝保險絲座
PPTC自恢復保險絲
PT100溫度感測器
正溫度係數熱敏電阻
感知器連接器線束
感測器探頭 & 電纜
單級毛細管恆溫器
慢熔斷微型保險絲
智慧型溫控器
表面貼裝保險絲
臨時截止鏈接
溫控開關
溫度保險絲
溫度感應器
溫度感測器電纜
溫度感測器探頭
溫度開關
熱切斷
熱切斷開關
熱熔斷器
熱保護器
熱敏開關
熱敏電阻感測器探頭
醫用一次性溫度探頭, NTC 感測器 Od 2.3mm 探頭
NTC溫度感測器探頭在電鍋頂蓋上的應用, 商用蓋電鍋頂部, 蓋測溫配件 23.62 x 0.39 x 0.39 英吋; 0.48 盎司. 愛普科斯 / AVX / SEMITEC/斯巴拉 / 三菱 / OHIZUMI NTC熱敏電阻感測器, 表面貼裝溫度感測器. 電鍋頂蓋溫度感測器– 快速反應時間,可立即調整加熱功率: 反應速度快, 此探頭可以立即調整加熱功率以保持所需的溫度.
Medical thermistor temperature sensors (NTC, PT100) are also very important physiological signal measurements in OR, ICU, and CCU. YAXUN can provide a complete set of reusable and disposable temperature probes to measure the patient’s body temperature. There are medical sensor probes for rectum, esophagus, and body surface. The wire is soft and comfortable, non-toxic, and all medical grade materials are used.
Introduction to disposable body medical temperature sensor probes
1. Today’s patient care requires body temperature monitoring, and temperature monitoring is also a very important physiological signal measurement in OR, ICU, and CCU. YAXUN can provide a complete set of reusable and disposable temperature probes to measure the patient’s body temperature.
2. There are probes for rectum, esophagus, and body surface.
3. The wire is soft and comfortable, non-toxic, and all medical grade materials are used in accordance with ANSI/AAMIEC53-1995 and GB706.1-995.
4. Latex-free.
Indications of disposable medical temperature sensor probes
Disposable temperature sensor probes are matched with multi-parameter monitors with temperature monitoring functions, and are suitable for one-time use when collecting and transmitting patient temperature signals.
Principle of disposable temperature sensor probes
Medical temperature probes can provide continuous temperature management for patients more accurately, safely and comfortably, and such temperature probes play an increasingly important role in the prognosis period during anesthesia and after perioperative period.
Features of disposable medical temperature sensor probes
1. Accurate and anti-interference skin temperature probe: The temperature probe is an embedded design, and the measured part is in direct contact with human skin. The probe chip has high sensitivity and can continuously and accurately provide patient temperature data; the top reflective layer can block external temperature interference.
2. Safe and comfortable foam, medical surgical grade film: low-viscosity foam, fixed temperature measurement position, and a layer of medical surgical film on the bottom is comfortable and non-irritating to the skin, especially for infants and children.
3. Safe, 可靠的, and no cross-infection: Insulation protection does not pose a risk of electric shock to patients; disposable, in line with hospital infection requirements, and no cross-infection to patients. Safe and reliable connection design prevents liquid inflow and ensures data accuracy.
Advantages of disposable medical temperature sensor probe
1. Adopting high-precision thermistor, it can continuously and accurately provide clinical temperature data to meet clinical temperature measurement needs.
2. Disposable use to prevent cross infection between patients.
3. Complete specifications to meet the temperature detection needs of adults, children, infants and newborns.
4. The adhesive surface treated with optimized technology makes the skin feel almost no stimulation or pressure.
5. The back of the surface temperature sensor probe is equipped with reflective silver paper foam to prevent interference from external heat sources, and the foam adhesive film does not damage the skin.
6. The ear canal temperature sensor probe adopts a double soft memory foam design, which can reduce the risk of damaging the tympanic membrane and block the influence of external heat sources.
7. Widely compatible with medical monitors currently on the market.
描述
類型: | Body Cavity Temperature Probe | B25/50: | 3950K, 3977K, 3435K |
感測頭: | O型圈, 金屬叉, 注射管, 不擴散條約, M16, 不銹鋼管 | 金屬絲: | CL2 PT4,#24 2466,#28 1332 |
用法: | Body Cavity Temperature Probe, 即熱式熱水器, 熱水器, 空調, 冰箱, 噴泉, 電磁爐, 咖啡機 | PN (額定功率): | 50兆瓦 |
強調: | 愛普科斯 / AVX / SEMITEC/斯巴拉 / 三菱 / OHIZUMI NTC熱敏電阻感測器, 表面貼裝溫度感測器 |
Body Cavity Temperature Probe Wire 0.5M~10M Theory Signal Output Origin.
規格名稱 | 範圍 | 檢測條件 |
R25(標稱電阻值) | 1k, 2k, 2.7k, 3k, 5k, 10k, 15k, 20k, 30k, 40k, 47k, 50k, 100k, 200k (愛普科斯 / AVX / SEMITEC/斯巴拉 / 三菱 / 大泉NTC熱敏電阻) | 恆溫25℃±0.05℃ |
R25 允許偏差(%) | ±1,±2, ±3, ±5, ±10 | 恆溫25℃±0.05℃ |
B25/50 或 B25/85(材料係數)(熱敏指數) | 2500~5000K | 恆溫25℃±0.05℃
恆溫85℃±0.05℃ |
B25/50 值允許偏差(%) | ±1,±2 | 恆溫25℃±0.05℃
恆溫50℃±0.05℃ |
∫(耗散係數) | ≥0.8mw/℃ | 空氣中靜電 |
時間(熱時間常數) | ≤25S | 空氣中靜電 |
面向(工作溫度) | -30℃~+120℃ | |
PN (額定功率) | 50兆瓦 | 在工作溫度範圍內 |
外殼和頭部 | 叉頭, O型圈頭,水滴頭, 金屬外殼, 螺紋銅殼, 注射頭, 不銹鋼管, 或根據客戶圖紙 | |
引線 | #24 30# 2651, UL4411 28#, 雙線導體等, 或根據客戶要求. | |
終端 | 可依各種端子的要求鉚接 |
服務
1. 您的詢問將在 24 小時;
2. 訓練有素、經驗豐富的員工隨時為您服務.
3. 獨特的設計產品和眾多私模產品等待您的選擇.
4. 嚴格保護您的隱私資訊和您的設計理念.
常問問題
Q1. 我可以訂購 NTC 的樣品嗎, PT100,PT1000, RTD, 和 DS18b20 感測器?
A: 是的, 我們歡迎樣品訂單來測試和檢查質量. 混合樣品是可以接受的.
聯絡我們
等待您的電子郵件, 我們將在短時間內回覆您 12 小時提供您所需的有價值的信息.