Ksd9700 溫控器 N.C 5A / 10雙金屬片溫控開關

KSD-9700 series 5A, 10A, 16A, 20A, 25A, 40A, AC 250V 50～60Hz thermostat thermal protector action switch consists of dish shape high sensitive bimetal elemeng, movable contact-head, static contact-piece, soleplate, outer case, ghermal resistant lead and so on. 電器正常工作時雙金屬片處於自由狀態，觸點閉合. 當環境溫度升高到預設工作溫度時, 當雙金屬盤受熱變形跳動時，觸點打開, 然後切斷電路以控制溫度。. The bimetallic element restores to its primary state and contact point is closed . The electric appliance restores its work. The product has many advantages such as small in resistor, puick in temperature feeling, fast in action. Safe and reliable. compact and so on. This product is widely used in home appliance’s motor and electrical equipment, such as air conditioner motor, 變壓器, 熱電器, ETC.

KSD9700雙金屬熱保護器開關

KSD9700 5A 10A 250V Thermal Cutoff Thermostat

KSD9700 Temperature Switch 5A 250V N.O. N.C

規格
額定電壓: AC 250V 50～60Hz
額定電流: 5A, 10A, 16A, 20A, 25A, 40A of Resistive Load
Switch Type and Number of poles: 1 pole opener
IP-Protection Degree: 防護等級00
Action Type: 1A
Operation Cycles: 10000 cycle
Insulation material PTI value : 175V
Resistance of Contact: ≤ 50mΩ (original state)
Resistance of Insulated : >100兆歐姆(DC500V normality)
Test Voltage : ≥ 1250V/1min(nomality)
1 或者 2 Temperature Control Switch
模型 : KSD9700
材料 : 金屬外殼
接觸 : 數控(Normal Closed)/不(Normal Open)
溫度 : 15°C~155°C
額定功率 : 250V 5A
Lead Wire Length : 7.3公分 / 2.9″
頭部尺寸 : 20 x 7.5 x 3.5mm/0.78″ x 0.3″ x 0.14″(L*W*T)

Precautions for use:
1. Do not deform or collapse the casing during installation!
2, this product is not suitable for use in the air temperature, only for contact temperature!
(Can be fixed by tie wire, iron wire, fixing seat or 704 silicone rubber)
3, the metal case is charged, not suitable for working in water.
The plastic case should not be immersed in the insulating seal when it is placed in the water.
4. When the product is installed, the temperature control switch should be close to the mounting surface of the controlled appliance.