产品类别
产品标签
铠装热电偶传感器
刀片保险丝座
汽车插片保险丝
汽车保险丝
陶瓷管保险丝
断路器
盘式温控器
DS18b20 温度传感器
电气保险丝
快熔断/慢熔断保险丝
保险丝盒支架
玻璃管保险丝
直插式保险丝座
限位卡盘温控器
迷你断路器
电机过载保护器
电机热保护
NTC传感器
NTC热敏电阻传感器
PCB 安装保险丝座
PPTC自恢复保险丝
PT100温度传感器
正温度系数热敏电阻
传感器连接器线束
传感器探头 & 电缆
慢熔断微型保险丝
表面贴装保险丝
临时截止链接
温控开关
温度保险丝
温度感应器
温度传感器电缆
温度传感器探头
温度开关
热切断
热切断开关
热熔断器
热保护器
热敏开关
热敏电阻传感器探头
88手动复位保护器 KUOYUH MINI 过流保护器断路器
88A系列设备手动复位断路器 (俗称电机过流保护器) 适用于交流 50/60Hz, 额定工作电压至250Vac, 直流32V直流, 额定电流为3A-20A,为电气设备内部分支电路提供额外的过载保护, 产品关键部分 感温保护器.
88A系列设备手动复位断路器 (俗称电机过流保护器) 适用于交流 50/60Hz, 额定工作电压至250Vac, 直流32V直流, 额定电流为3A-20A,为电气设备内部分支电路提供额外的过载保护, 产品关键部分 感温保护器. 88 Series Push-to-Reset circuit breaker is a unipolar, single-push reset thermal protector product, used to protect motor equipment.
Product name: 88A series
rating :3A-20A;
(Input Power):125VAC/250VAC/32VDC 50-60Hz;
(Withstand voltage strength):1500VAC/1min;
Leakage current: ≤0.5mA(1500VAC/min,the leaked current is less than≤0.5mA);
(Insulation Resistance):500VDC1Min≥100MΩ;
(Rated short-circuit capacity):125VAC/1000A,250VAC/1000A;
(Rated breaking capacity): 6 times rated current;
(reset): Manual Push Reset;
(Reset Time): Within 60s”;
Tripping characteristics
(The test environment temperature):25℃±3℃;
(200% of Ratcd Currcnt): 5-30s” Seconds Trip;
(150% of Rated Current): Trip within 1 Hour;
(100% of Rated Current): Hold, No Trip ;
Main Technical Parameters
额定电流 | 125/250交流电 |
32直流电压 | |
额定电压 | XXA |
Interrupt Capacity | 1000A(UL1077) |
Insulation Resistance | 500VDC 5s″, insulation resistance≥100ΜΩ |
介电强度 | 1500VAC/min |
Reset Time | within 60S |
复位类型 | Manual reset |
Mechanical/Environmental Data
Working temperature: -10℃ to 60℃
终端: Quick-connect terminal or solder terminal
Nut: 多种选择, see product appendix and diagram
Terminal temperature rise: 额定电流 <65℃ (ambient temperature is 25℃)
Contact life: >500Cycles at rated current and 125VAC×150%
Table of Environmental Correction Factors
(Derating Factor) | |
-5°C | (3A-4A)×1.2, (5A-30A)×1.12 |
+40°C | (3A-4A)×0.92,(5A-30A)×0.94 |
The time current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping. Please multiply the current brea ker current ratings by the derating factor shown below
Example:
Normal Continuous Current= 10A
Ambient Temperature = 45 °C
Multiplication Factor = 0.85
Recommended Rating=10A/0.85=11.8A
Select the Nea rest Rating = 12A
OVERLOAD | TRIP TIME |
150% | Trip in a hour |
200% | 5.0-30.0 SEC |
300% | 1.2-12.0 SEC |
400% | 0.6-5.0 SEC |
500% | 0.4-2.8 SEC |
600% | 0.3-1.8 SEC |
800% | 0.18-0.9 SEC |
1000% | 0.12-0.7 SEC |
Performance form of the experiment
Max Resistance V.S.Current Rating at 25℃ | Derating Factor | ||
Temperature | Rating Amp | ||
Current Rating in Amp | Max Resistance in ohms | 60℃ | X 0.6 |
3-4放大器 | < 0.05 | 50℃ | X 0.7 |
5-6放大器 | < 0.04 | 40℃ | X 0.8 |
7-8放大器 | < 0.025 | 30℃ | X 0.9 |
9-11放大器 | < 0.02 | 25℃ | X 1.0 |
12-13放大器 | < 0.01 | 20℃ | X 1.1 |
14-16放大器 | < 0.008 | 10℃ | X 1.3 |
17-25放大器 | < 0.007 | 0℃ | X 1.5 |
Approval | File No. | 额定电流 | 额定电压 | 标准 |
CUL | E155159 | 3-30A | 125/250交流电 | UL1077 |
德国莱茵TUV | B140558611005 | 3-30A | 125-250交流电 | EN60934 |
32直流电压 | ||||
CCC | 2011010307520568 | 3-30A | 125/250交流电 | GB17001 |
联系我们
等待您的电子邮件, 我们将在短时间内回复您 12 小时提供您需要的有价值的信息.
相关产品
China Custom Auto Reset Circuit Breaker With Bolt
What Is it a auto reset circuit breaker? Functions and applications of circuit breaker:
Auto reset circuit breaker uses the action characteristics of bimetallic strips as the working principle of the product. It is used in AC/DC Rated current 5-50A; Input voltage: standard 12VDC; 125VAC/250VAC50-60HZ; customizable 24VDCcircuits that need to be protected from overload or excessive current.