产品类别
产品标签
铠装热电偶传感器
刀片保险丝座
汽车插片保险丝
汽车保险丝
陶瓷管保险丝
断路器
盘式温控器
DS18b20 温度传感器
电气保险丝
快熔断/慢熔断保险丝
保险丝盒支架
玻璃管保险丝
直插式保险丝座
限位卡盘温控器
迷你断路器
电机过载保护器
电机热保护
NTC传感器
NTC热敏电阻传感器
PCB 安装保险丝座
PPTC自恢复保险丝
PT100温度传感器
正温度系数热敏电阻
传感器连接器线束
传感器探头 & 电缆
慢熔断微型保险丝
表面贴装保险丝
临时截止链接
温控开关
温度保险丝
温度感应器
温度传感器电缆
温度传感器探头
温度开关
热切断
热切断开关
热熔断器
热保护器
热敏开关
热敏电阻传感器探头
Digital DS18B20 Temperature Sensor Module Kit Waterproof 100CM Sensor Cable
The China Custom Digital temperature sensors come with the original DS18B20, high quality in a stainless steel housing (6 * 30毫米) and 3m #24 30# 2651, UL4411 28# Silicone cable (120 英寸) in length.
分类: 温度感应器
标签: DS18b20 温度传感器, 传感器探头 & 电缆, 温度感应器, 温度传感器电缆, 温度传感器探头
1-Wire interface Digital DS18B20 Temperature Sensor, Usable temperature range: -55 to 125°C (-67°F to +257°F) · 9 to 12 bit . DS18B20 3M Cable Digital Temperature Thermal Waterproof Probe Sensor -55°C to +125°C compatible with Arduino and Raspberry Pi Open Source Programming!
The China Custom Digital temperature sensors come with the original DS18B20, high quality in a stainless steel housing (6 * 30毫米) and 3m #24 30# 2651, UL4411 28# Silicone cable (120 英寸) in length.
DS18B20 temperature sensor will enable you to easily measure and read the temperature via available and open-source libraries.
Our DS18B20 temperature sensor is perfect to use with Arduino and Raspberry Pi and other microcontrollers, and due to waterproof cable is also suitable for outdoor use.
Simple temperature readout through ready-to-use open source libraries for the DS18B20 temperature sensor! Wide measuring range from -55°C to +125°C and low deviation of only +/- 0.5°C between -10°C and +85°C!
Product Name: | 1-Wire DS18B20 Temperature Sensor | Output: | Digital Sensor |
Cable: | Customized | Voltage Supply: | 3.0V~5.5V |
工作温度: | -55°C ~ 125°C | Max Power: | 450mW |
Shell Material: | Stainless Steel | Connector: | 2.54MM Connector |
Drivepipe: | Heat Shrinkable Tube | Feature: | Waterproof |
强调: | 5.5VDC DS18B20 Temperature Sensor use with Arduino and Raspberry Pi |
产品描述
Stainless Steel Package Waterproof Probe NTC Digital Temperature Sensor DS18B20 Temperature Sensor
Output: Digital
用法: Temperature measurement use with Arduino and Raspberry Pi
Cable length: Custom 0.5M, 1M, 2M or more
Theory: Resistance Sensor
Probe material: Stainless Steel
Accuracy: -10~+125℃, the accuracy is±0.5℃
Cable material: PVC, Silicone,PTFE
Description of Digital DS18B20 Temperature Sensor
DS18B20 temperature sensor is composed of DALLAS, Stainless steel probe, cable and connectors. DS18B20 is a commonly used digital temperature sensor, and its output is digital signal. It has the characteristics of small size, low hardware overhead, strong anti-interference ability and high precision.
Specification of Digital DS18B20 Temperature Sensor
Digital chip | DS18B20 |
电源 | 3.0~5.5VDC |
Resolution ratio | 9~12 bit, Corresponding distinguish temperature are 0.5℃,0.25℃,0.125℃ and 0.0625℃ |
Tolerance | -10℃ to +125℃ ±0.5℃ |
Treatment proccess | Waterproof |
工作温度范围 | -50~+125℃ (when the temperature is -10~+85℃, the accuracy is±0.5℃) |
Shell size | Diameter:¢6~¢9mm,长度 : 10mm~1000mm |
Wire | UL Series(such as UL1007), Supply line number, using temperature range, outside diameter and material requirements. |
Shell material | Stainless steel |
Connector | Molex, JST, DuPont, CWB, CJT, U type etc. |
Drivepipe | Heat shrinkable tube; PVC tube, glass fiber tube; |
Connection mode | 黑色的 : GND, Yellow: DATA Red:VDD+ |
Characteristic of Stainless Steel Digital DS18B20 Temperature Sensor
1. Digital signal output
Wire interface Requires Only one port pin for communication. Requires no external components
2. High Accuracy
工作温度范围:-55°C to +125°C (-67F to +257F), ±0.5°C accuracy from -10°C to +85°C
3. Data Line Power Supply
Can be powered from data line. Power supply range is 3.0V to 5.5V
4. Fast Response
Thermometer resolution is programmable from 9 to 12 bits.
5. Various Probe Design
Probe dimension :6*30毫米, 6*50mm or customized
Application of Waterproof Digital DS18B20 Temperature Sensor
Water Temperature Monitoring, HVAC, Medical Instrument, GPS Oil Tank Temperature Monitoring
FAQ of DS18B20 Temperature Sensor
Q: Where physically on the device does the temperature measurement take place?
A: The DS18B20 does not sense temperature directly through the package. For all package types, the DS18B20 senses temperature primarily through the GND pin. Ensuring a good thermal connection between the GND pin of the device and the heat source you wish to measure will provide the best results.
Q: Is there a way to extend the temperature range of the DS18B20?
A: No, there is not a way to increase the range it reads. The DS18B20 reads with an accuracy of ±0.5°C from -10°C to +85°C and ±2°C accuracy from -55°C to +125°C.
联系我们
等待您的电子邮件, 我们将在短时间内回复您 12 小时提供您需要的有价值的信息.
相关产品
RTD PT100 Temperature Sensor Probe with Cable
What is a Platinum thermal resistance sensor?
An RTD (Resistance Temperature Detector) is a Platinum thermal resistance whose resistance changes with changes in temperature. Its resistance increases as the sensor temperature increases. The relationship between resistance and temperature is well known and repeatable over time. RTD is a passive device. It does not produce output by itself. External electronics can be used to measure the sensor resistance by passing a small current through the sensor to produce a voltage. Typically 1 mA or less measurement current, maximum 5 嘛, without risk of self-heating.