产品类别
产品标签
铠装热电偶传感器
刀片保险丝座
汽车插片保险丝
汽车保险丝
陶瓷管保险丝
断路器
盘式温控器
DS18b20 温度传感器
电气保险丝
快熔断/慢熔断保险丝
保险丝盒支架
玻璃管保险丝
直插式保险丝座
限位卡盘温控器
迷你断路器
电机过载保护器
电机热保护
NTC传感器
NTC热敏电阻传感器
PCB 安装保险丝座
PPTC自恢复保险丝
PT100温度传感器
正温度系数热敏电阻
传感器连接器线束
传感器探头 & 电缆
单级毛细管恒温器
慢熔断微型保险丝
智能温控器
表面贴装保险丝
临时截止链接
温控开关
温度保险丝
温度感应器
温度传感器电缆
温度传感器探头
温度开关
热切断
热切断开关
热熔断器
热保护器
热敏开关
热敏电阻传感器探头
医用一次性温度探头, NTC 传感器 Od 2.3mm 探头
NTC温度传感器探头在电饭锅顶盖上的应用, 商用盖电饭锅顶部, 盖测温配件 23.62 x 0.39 x 0.39 英寸; 0.48 盎司. 爱普科斯 / AVX / 赛米特/斯巴拉 / 三菱 / OHIZUMI NTC热敏电阻传感器, 表面贴装温度传感器. 电饭锅顶盖温度传感器– 快速响应时间,可立即调整加热功率: 响应速度快, 该探头可以立即调整加热功率以保持所需的温度.
Medical thermistor temperature sensors (NTC, PT100) are also very important physiological signal measurements in OR, ICU, and CCU. YAXUN can provide a complete set of reusable and disposable temperature probes to measure the patient’s body temperature. There are medical sensor probes for rectum, esophagus, and body surface. The wire is soft and comfortable, non-toxic, and all medical grade materials are used.
Introduction to disposable body medical temperature sensor probes
1. Today’s patient care requires body temperature monitoring, and temperature monitoring is also a very important physiological signal measurement in OR, ICU, and CCU. YAXUN can provide a complete set of reusable and disposable temperature probes to measure the patient’s body temperature.
2. There are probes for rectum, esophagus, and body surface.
3. The wire is soft and comfortable, non-toxic, and all medical grade materials are used in accordance with ANSI/AAMIEC53-1995 and GB706.1-995.
4. Latex-free.
Indications of disposable medical temperature sensor probes
Disposable temperature sensor probes are matched with multi-parameter monitors with temperature monitoring functions, and are suitable for one-time use when collecting and transmitting patient temperature signals.
Principle of disposable temperature sensor probes
Medical temperature probes can provide continuous temperature management for patients more accurately, safely and comfortably, and such temperature probes play an increasingly important role in the prognosis period during anesthesia and after perioperative period.
Features of disposable medical temperature sensor probes
1. Accurate and anti-interference skin temperature probe: The temperature probe is an embedded design, and the measured part is in direct contact with human skin. The probe chip has high sensitivity and can continuously and accurately provide patient temperature data; the top reflective layer can block external temperature interference.
2. Safe and comfortable foam, medical surgical grade film: low-viscosity foam, fixed temperature measurement position, and a layer of medical surgical film on the bottom is comfortable and non-irritating to the skin, especially for infants and children.
3. Safe, 可靠的, and no cross-infection: Insulation protection does not pose a risk of electric shock to patients; disposable, in line with hospital infection requirements, and no cross-infection to patients. Safe and reliable connection design prevents liquid inflow and ensures data accuracy.
Advantages of disposable medical temperature sensor probe
1. Adopting high-precision thermistor, it can continuously and accurately provide clinical temperature data to meet clinical temperature measurement needs.
2. Disposable use to prevent cross infection between patients.
3. Complete specifications to meet the temperature detection needs of adults, children, infants and newborns.
4. The adhesive surface treated with optimized technology makes the skin feel almost no stimulation or pressure.
5. The back of the surface temperature sensor probe is equipped with reflective silver paper foam to prevent interference from external heat sources, and the foam adhesive film does not damage the skin.
6. The ear canal temperature sensor probe adopts a double soft memory foam design, which can reduce the risk of damaging the tympanic membrane and block the influence of external heat sources.
7. Widely compatible with medical monitors currently on the market.
描述
类型: | Body Cavity Temperature Probe | B25/50: | 3950K, 3977K, 3435K |
传感头: | O型圈, 金属叉, 注射管, 不扩散条约, M16, 不锈钢管 | 金属丝: | CL2 PT4,#24 2466,#28 1332 |
用法: | Body Cavity Temperature Probe, 即热式热水器, 热水器, 空调, 冰箱, 喷泉, 电磁炉, 咖啡机 | PN (额定功率): | 50兆瓦 |
强调: | 爱普科斯 / AVX / 赛米特/斯巴拉 / 三菱 / OHIZUMI NTC热敏电阻传感器, 表面贴装温度传感器 |
Body Cavity Temperature Probe Wire 0.5M~10M Theory Signal Output Origin.
规格名称 | 范围 | 检测条件 |
R25(标称电阻值) | 1k, 2k, 2.7k, 3k, 5k, 10k, 15k, 20k, 30k, 40k, 47k, 50k, 100k, 200k (爱普科斯 / AVX / 赛米特/斯巴拉 / 三菱 / 大泉NTC热敏电阻) | 恒温25℃±0.05℃ |
R25 允许偏差(%) | ±1,±2, ±3, ±5, ±10 | 恒温25℃±0.05℃ |
B25/50 或 B25/85(材料系数)(热敏指数) | 2500~5000K | 恒温25℃±0.05℃
恒温85℃±0.05℃ |
B25/50 值允许偏差(%) | ±1,±2 | 恒温25℃±0.05℃
恒温50℃±0.05℃ |
∫(耗散系数) | ≥0.8mw/℃ | 空气中静电 |
时间(热时间常数) | ≤25S | 空气中静电 |
面向(工作温度) | -30℃~+120℃ | |
PN (额定功率) | 50兆瓦 | 在工作温度范围内 |
外壳和头部 | 叉头, O型圈头,水滴头, 金属外壳, 螺纹铜壳, 注射头, 不锈钢管, 或根据客户图纸 | |
引线 | #24 30# 2651, UL4411 28#, 双线导体等, 或根据客户要求. | |
终端 | 可根据各种端子的要求进行铆接 |
服务
1. 您的询问将在 24 小时;
2. 训练有素、经验丰富的员工随时为您服务.
3. 独特的设计产品和众多私模产品等待您的选择.
4. 严格保护您的隐私信息和您的设计理念.
常问问题
Q1. 我可以订购 NTC 的样品吗, PT100,PT1000, RTD, 和 DS18b20 传感器?
A: 是的, 我们欢迎订购样品来测试和检查质量. 混合样品是可以接受的.
联系我们
等待您的电子邮件, 我们将在短时间内回复您 12 小时提供您需要的有价值的信息.