KSD301 微波炉用双金属卡盘温度开关, 烤箱, 咖啡机

KSD301 Series Bimetal Snap-Action Temperature Switches are based on a bimetal snap disc two-contact system with Disc thermostat response sensitivity. KSD301 Snap Disc, or snap switch thermostats are bimetal mechanical thermostats that function via the thermal expansion and contraction of a bimetal disc that “snaps”.
KSD301 Disc Thermostat (快动式), Contact Voltage 120/240, 温度范围 113 到 127 F, 开关动作: Closes on Rise, Differential: 30 F.
KSD301 Temperature Switch Bimetal 10A 250V Normally Closed NC / 110°C Automatic reset. 电压: 250V Current: 10A; Fixing centres: 24毫米.

KSD301 Manual reset Thermostat Temperature Control Switch

KSD301 Bimetal Snap Disc Temperature Switch

KSD301 温度开关 双金属片 10A 250V 常闭 NC 110°C 自动复位

KSD301 Disc Temperature Switch’s specification
1. 电气额定值: AC 125V max 15A; AC250V 5A 10A 15A 最大16A
2. 动作温度: -10~300 degree
3. Recovery and action temperature difference: 10 到 25 度, 或根据客户要求.
4. Temperature deviation: +-3 / +-5 / +-10 degree or according to client’s request
5. Circuit resistance: ≤50mΩ (Initial value)
6. 绝缘电阻: ≥100mΩ (DC500V Normal State)
7. 介电强度: AC50Hz 1500V / 分钟, no breakdown blinding (Normal State)
Life cycle: ≥100000
8. Normally closed or open
9. Two kinds of mounting bracket: movable or immovable
10. 终端:
一个. Terminal type: 187series of 4.8*0.5mm and 4.8*0.8mm, 250 series of 6.3*0.8mm
乙. Terminal Angle: bending angle: 0~90°C optional
11. Two kinds of body: plastic or ceramic.
12. Two kinds of temperature sensor face: aluminium cap or copper head.

KSD301 Temperature Switch Open temperature & 复位温度
1. According to customer’s request to set the open temperature and reset temperature.
2. The standard open temperature and reset temperature’s sheet for auto reset type as below