产品类别
产品标签
铠装热电偶传感器
刀片保险丝座
汽车插片保险丝
汽车保险丝
陶瓷管保险丝
断路器
盘式温控器
DS18b20 温度传感器
电气保险丝
快熔断/慢熔断保险丝
保险丝盒支架
玻璃管保险丝
直插式保险丝座
限位卡盘温控器
迷你断路器
电机过载保护器
电机热保护
NTC传感器
NTC热敏电阻传感器
PCB 安装保险丝座
PPTC自恢复保险丝
PT100温度传感器
正温度系数热敏电阻
传感器连接器线束
传感器探头 & 电缆
慢熔断微型保险丝
表面贴装保险丝
临时截止链接
温控开关
温度保险丝
温度感应器
温度传感器电缆
温度传感器探头
温度开关
热切断
热切断开关
热熔断器
热保护器
热敏开关
热敏电阻传感器探头
The Ksd301 temperature switch is a temperature switch using a bimetal as a temperature sensing element. When the appliance is working normally, the bimetal is in a free state and the contacts are in a closed / open state. When the temperature rises to the operating temperature value, the bimetallic element acts quickly due to the internal stress generated by the heat, opening / closing the contacts, and cutting / connecting the circuit, thereby providing thermal protection. 当温度降至复位温度时, the contact will be closed / opened automatically and the normal working state will be restored. Widely used in household appliances motors and electrical appliances, such as washing machine motors, air-conditioning fan motors, 变形金刚, ballasts, electric heating appliances, ETC.
● KSD301 series Temperature Switches technical parameters
⑴ 电气参数: 1) CQC, VDE, UL, 市电AC250V 50 ~60Hz 5A / 10A / 15A (阻性负载)
2) UL AC125V 50Hz 15A (阻性负载)
⑵工作温度范围: 0-300 ℃ (选修的), 温度精度: ± 2 ± 3 ± 5 ± 10 ℃
⑶ 恢复与动作温度差: 8 ~ 100 ℃ (选修的)
⑷ 连接方式: 插头端子 250 # (弯曲 0 ~ 90 ° 可选); 插头端子 187 # (弯曲 0 ~ 90 ° 可选, 厚度0.5、0.8mm可选)
⑸ 生活: ≥ 100,000 次
⑹ 电气强度: 交流50Hz 1800V持续1min, 无闪烁, 没有故障
⑺ 接触电阻: ≤50mΩ
⑻ 绝缘电阻: ≥100MΩ
⑼ 联系表:
常闭: 温升, 联系人打开, 温度下降, 触点已连接;
常开型: 温升, 触点已连接, 温度下降, 联系人打开
⑽外壳防护等级: 防护等级00
安装: KSD301系列安装普通活动环, 环装小圆活动, 平板活动环安装, 带安装孔 普通大铝盖 带安装孔 加长铝盖.
● KSD301 series Temperature Switches competitive advantage
⑴ 性能稳定
⑵ 精度高
⑶体积小, 轻的
⑷ 高可靠性, 长寿
⑸ 小收音机干忧
⑹不要拉弧
应用领域:
Widely used in: ⑴ KSD301 series Temperature Switches applications Sterilizer ,
⑵ dishwasher,
⑶ dryer,
⑷ microwave,
⑸ water dispenser,
⑹ electric kettle,
⑺ office equipment,
⑻ coffee maker,
⑼ sandwich toaster,
⑽ car seat heaters, automobile antifreeze, electric cooker, refrigerator, air conditioner, laminator and other electric appliances.
● KSD301 series thermostat Caution
⑴ grounding: The thermostat metal cover is connected to the equipment grounding metal parts.
⑵ when using a contact temperature installation should be closely aligns the charged surface of the metal lid of the appliance mounting surface to ensure that the temperature effect. should be coated with thermal grease or other similar performance thermal media in surface temperature.
⑶ installation can not cover the top surface collapsed, loose or deformed, so as not to affect the performance.
⑷ not allow the liquid to penetrate the internal temperature, not cause the shell cracks, not free to change the shape of the external terminals.
⑸ product is not greater than 5A current in the circuit, should be selected cross-section of 0.5 5-1㎜2 copper core wire connection; not more than 10A current in the circuit, should be selected cross-section of copper conductor wire connection 0.75-1.5㎜2 .
⑹ products should be less than 90% relative humidity, ambient temperature below 40 ℃ ventilated, clean, dry, non-corrosive gases stored in the warehouse.
⑺ use can not bend terminals, otherwise it will affect the reliability of the electrical connection.
● KSD301 series Temperature Switches dimension drawing
联系我们
等待您的电子邮件, 我们将在短时间内回复您 12 小时提供您需要的有价值的信息.