产品类别
产品标签
铠装热电偶传感器
刀片保险丝座
汽车插片保险丝
汽车保险丝
陶瓷管保险丝
断路器
盘式温控器
DS18b20 温度传感器
电气保险丝
快熔断/慢熔断保险丝
保险丝盒支架
玻璃管保险丝
直插式保险丝座
限位卡盘温控器
迷你断路器
电机过载保护器
电机热保护
NTC传感器
NTC热敏电阻传感器
PCB 安装保险丝座
PPTC自恢复保险丝
PT100温度传感器
正温度系数热敏电阻
传感器连接器线束
传感器探头 & 电缆
慢熔断微型保险丝
表面贴装保险丝
临时截止链接
温控开关
温度保险丝
温度感应器
温度传感器电缆
温度传感器探头
温度开关
热切断
热切断开关
热熔断器
热保护器
热敏开关
热敏电阻传感器探头
Replacement Hi-limit Cut off Thermostat & Resettable Thermal Switch
KSD301, KD302, KSD306, KD308 Hi-limit Cut off Thermostat & Resettable Thermal Switch When the circuit is working properly, the contacts are in a closed state. When the rated operating temperature is reached, the bimetal is deformed by heat and breaks quickly, cutting off the circuit. After that, the device begins to cool down.
Hi-limit Cut off Thermostat & Resettable Thermal Switch When the circuit is working properly, the contacts are in a closed state. When the rated operating temperature is reached, the bimetal is deformed by heat and breaks quickly, cutting off the circuit. After that, the device begins to cool down. When it reaches the specified reset temperature, the bimetallic strip and spring strip snap back to their starting position, the contacts will close again, and the device will start working again.
Replacement Resettable Thermal Cutoff Switch process:
Multi-mount Manual Reset High Temp Limit Safety Switch L350°f For heater.
The fuse on the heater is a safety device. The hi-limit thermostat should control the temperature so that the fuse does not blow. Therefore if the fuse does blow the hi-limit thermostat is not regulating the temperature so it is assumed that it is toast. Note that the hi-limit thermostat is also just a safety device.
If the unit is running on the hi-limit thermostat, this indicates a problem as the hi-limit thermostat should not be regulating heater temperature, the cycling thermostat on the blower should be doing this.
You may have a grounded element (the element has sagged or broken and is touching the case) in which case none of the Hi-limit Cut off thermostats can regulate the temperature. Often you can see this by inspecting the heater assembly.
It can be checked with a meter.
Unplug the unit and remove the wires from the heater. Measure the heater should be around 10 ohms. Then measure from each connector to the case/frame both should be infinite ohms (open).
Another possibility is a restriction or leak in the air flow inside the unit.
The dryer is actually sucking air over the heating coils, through the drum and then pushing the air out the exhaust. If the lint filter is coated with fabric softener residue this can reduce the air flow significantly causing the heater to run hot.
Also the operating/cycling Hi-limit Cut off thermostat is on the blower wheel so if the unit is sucking in air through a blown seal, it sees a cooler temperature at the blower and again causes the heater to run hot.
类型 | Hi-limit Cut off Thermostat & Resettable Thermal Switch |
Product Name | KSD301 KSD302 KSD306 KSD314 electric motor Hi-limit Cut off Thermostat & Resettable Thermal Switch |
Rating Current | 5A-60A |
Rating Voltage | 250V |
Certificate | ROHS CQC CCC TUV VDE |
复位类型 | Automatic/Manual Reset |
应用 | Small Home Appliance, ETC. |
Condition | Normal Open/Close, 手动的 / 自动复位 |
Material | Plastic, Ceramic/Metel Shell |
Packing | PE Bag, Carton |
联系我们
等待您的电子邮件, 我们将在短时间内回复您 12 小时提供您需要的有价值的信息.
相关产品
Bimetal Thermal Protector NO Temperature Control Switch KSD9700 / Seki
Process of Custom Small Size Bimetal Thermal Protector NO / NC (KSD9700 / Seki Temperature Control Switch Plastic, Bimetal; 额定电压 : 250V; Current : 5A~25 Amp ; ).
①: Discuss requirements with customers (control thermal cut-off temperature point, action mode (manual and automatic reset), reset temperature, installation method and size);
China Custom Limit Disc Thermostat Control Switches Therm o-Disc
Snap Disc, 或者 3/4" Limit switch thermostats (KSD301/KSD302/KSD304/KSD308) are bimetal mechanical thermostats that function via the thermal expansion and contraction of a bimetal disc that “snaps” from a convex to a concave shape at a set temperature. carrying up to AC 110V/400V, 10A-60A amps-240 Volts, Action mode: 自动复位, manual reset (normally open/normally closed).
China SPST Bimetal Limit Snap Thermal Switch Supplier
SPST-NO/NC Bimetal thermal switch Applications include electric motors, 加热器, 变形金刚, thermal coils, electronics, HVAC, and white goods. China Custom Limit Snap bimetal thermal switch (250v 10a / 125v 16a) is a temperature sensing device which is made with a formed 1/2′′ or 3/4′′ bi-metal disc that “snaps” at a preset temperature.