产品
机械电阻热熔断器装置 (DF SF 系列 10amp)
随后, 热熔断器触头与直流电路之间的电压升高,确保直流电路断开. 通过本发明, 解决了直流电路中热熔断器不能有效切断电路的问题, 达到了提高电路安全性的效果.
医用体腔温度测量探头 2.252k 或 10k 欧姆皮肤温度传感器
医用温度传感器, 产品型号齐全, 质量可靠. 1K至680K电阻可选, 使用寿命可达 10 年. 医疗级温度传感器, 汽车传感器, 家电传感器芯片采用高精度芯片, 响应时间可达 0.5 秒.
医用一次性温度探头, NTC 传感器 Od 2.3mm 探头
NTC温度传感器探头在电饭锅顶盖上的应用, 商用盖电饭锅顶部, 盖测温配件 23.62 x 0.39 x 0.39 英寸; 0.48 盎司. 爱普科斯 / AVX / 赛米特/斯巴拉 / 三菱 / OHIZUMI NTC热敏电阻传感器, 表面贴装温度传感器. 电饭锅顶盖温度传感器– 快速响应时间,可立即调整加热功率: 响应速度快, 该探头可以立即调整加热功率以保持所需的温度.
婴儿医用表面温度传感器,误差±0.1℃
Medical surface temperature sensor is used to measure human surface temperature. The product nominal resistance is 2.252kΩ or 10kΩ. The probe is a stainless steel φ5.6 probe, which can be equipped with a 2-pin aviation plug (or other plugs according to customer requirements). The measurement temperature tolerance is (25℃~45℃) ±0.1℃.
Metal Thermal Fuse for Limit Temperature Protection
Metal thermal fuse link (thermal cut off ) consists of a sliding contact, 一个春天, and an electrically nonconductive thermal pellet. Before the limit thermal fuse is activated, current flows from the left lead to the sliding contact and through the metal housing to the right lead. Metal Shell Thermal Fuse Cutoff 250VAC 10A Temperature Fuse link TF 72-250℃ (192℃).
Micro medical radiofrequency ablation electrode temperature sensor
φ0.30mm PI tube packaged medical temperature sensor. This product is a miniature medical radiofrequency ablation electrode temperature sensor. The product uses a polyimide tube with an outer diameter of Maxφ0.30mm to encapsulate epoxy resin, and the lead wire uses an enameled wire with an outer diameter of 0.05mm. The resistance value of the miniature thermistor sensor is calibrated one by one.
热断路熔断器型号及应用
A thermal fuse is also known as a tmperature fuse, 热连接, thermal cut-out (总拥有成本), or one shot. It is a temperature sensing circuit cut-off device (China custom metal, 陶瓷制品, square shell thermal fuse). A limitor thermal fuse can sense the overheating generated by abnormal operation of electrical and electronic products, 从而切断电路,避免火灾.
klixon 6AP 榨汁机电机过载保护器
小型化, 长寿命和完全可靠性. 采用导电性能良好的双金属材料,保证能承受正常回路电流的要求. 双金属片和电热丝的组合具有快速脱扣和非常精确的脱扣时间,防止电机过热.